IOS Bootloader - Starting system. flash is writable FLASH CHIP: Spansion Mirrorbit (0001) Xmodem file system is available. flashfs[0]: 276 files, 15 directories flashfs[0]: 0 orphaned files, 0 orphaned directories flashfs[0]: Total bytes: 31997952 flashfs[0]: Bytes used: 22910464 flashfs[0]: Bytes available: 9087488 flashfs[0]: flashfs fsck took 19 seconds. Reading cookie from SEEPROM Base Ethernet MAC address: 10:05:ca:63:f3:e9 Ethernet speed is 100 Mb - FULL Duplex Loading "flash:/ap3g2-rcvk9w8-mx/ap3g2-rcvk9w8-mx"...########################## File "flash:/ap3g2-rcvk9w8-mx/ap3g2-rcvk9w8-mx" uncompressed and installed, entry point: 0x2003000 executing... Secondary Bootloader - Starting system. Tide MB - 32MB of flash Xmodem file system is available. flashfs[0]: 276 files, 15 directories flashfs[0]: 0 orphaned files, 0 orphaned directories flashfs[0]: Total bytes: 31997952 flashfs[0]: Bytes used: 22910464 flashfs[0]: Bytes available: 9087488 flashfs[0]: flashfs fsck took 8 seconds. Base Ethernet MAC address: 10:05:ca:63:f3:e9 Boot CMD: 'boot flash:/ap3g2-rcvk9w8-mx/ap3g2-rcvk9w8-xx' Loading "flash:/ap3g2-rcvk9w8-mx/ap3g2-rcvk9w8-xx"...###################### File "flash:/ap3g2-rcvk9w8-mx/ap3g2-rcvk9w8-xx" uncompressed and installed, entry point: 0x1003000 executing... Restricted Rights Legend Use, duplication, or disclosure by the Government is subject to restrictions as set forth in subparagraph (c) of the Commercial Computer Software - Restricted Rights clause at FAR sec. 52.227-19 and subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer Software clause at DFARS sec. 252.227-7013. cisco Systems, Inc. 170 West Tasman Drive San Jose, California 95134-1706 Cisco IOS Software, C2600 Software (AP3G2-RCVK9W8-M), Version 15.2(4)JB4, RELEASE SOFTWARE (fc1) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2014 by Cisco Systems, Inc. Compiled Thu 06-Mar-14 10:46 by prod_rel_team Tide MB - 32MB of flash Initializing flashfs... flashfs[2]: 276 files, 15 directories flashfs[2]: 0 orphaned files, 0 orphaned directories flashfs[2]: Total bytes: 31739904 flashfs[2]: Bytes used: 22910464 flashfs[2]: Bytes available: 8829440 flashfs[2]: flashfs fsck took 8 seconds. flashfs[2]: Initialization complete. flashfs[3]: 0 files, 1 directories flashfs[3]: 0 orphaned files, 0 orphaned directories flashfs[3]: Total bytes: 11999232 flashfs[3]: Bytes used: 1024 flashfs[3]: Bytes available: 11998208 flashfs[3]: flashfs fsck took 1 seconds. flashfs[3]: Initialization complete. Copying radio files from flash: to ram: %Error opening flash:/ap3g2-rcvk9w8-mx/E2.bin (No such file or directory) %Error opening flash:/ap3g2-rcvk9w8-mx/B2.bin (No such file or directory) %Error opening flash:/ap3g2-rcvk9w8-mx/V2.bin (No such file or directory) %Error opening flash:/ap3g2-rcvk9w8-mx/X2.bin (No such file or directory) %Error opening flash:/ap3g2-rcvk9w8-mx/Y2.bin (No such file or directory) %Error opening flash:/ap3g2-rcvk9w8-mx/R2.bin (No such file or directory) %Error opening flash:/ap3g2-rcvk9w8-mx/Q2.bin (No such file or directory) %Error opening flash:/ap3g2-rcvk9w8-mx/C2.bin (No such file or directory) Uncompressing radio files... File not found: flash:/ap3g2-rcvk9w8-mx/8004.img File not found: flash:/ap3g2-rcvk9w8-mx/E5.bin File not found: flash:/ap3g2-rcvk9w8-mx/B5.bin File not found: flash:/ap3g2-rcvk9w8-mx/V5.bin File not found: flash:/ap3g2-rcvk9w8-mx/X5.bin File not found: flash:/ap3g2-rcvk9w8-mx/Y5.bin File not found: flash:/ap3g2-rcvk9w8-mx/R5.bin File not found: flash:/ap3g2-rcvk9w8-mx/Q5.bin File not found: flash:/ap3g2-rcvk9w8-mx/C5.bin File not found: flash:/ap3g2-rcvk9w8-mx/8006.img ...done Initializing flashfs. This product contains cryptographic features and is subject to United States and local country laws governing import, export, transfer and no ip http server ^ % Invalid input detected at '^' marker. use. Delivery of Cisco cryptographic products does not imply third-party authority to import, export, distribute or use encryption. Importers, exporters, distributors and users are responsible for compliance with U.S. and local country laws. By using this product you agree to comply with applicable laws and regulations. If you are unable to comply with U.S. and local laws, return this product immediately. A summary of U.S. laws governing Cisco cryptographic products may be found at: http://www.cisco.com/wwl/export/crypto/tool/stqrg.html If you require further assistance please contact us by sending email to export@cisco.com. cisco AIR-CAP2602I-E-K9 (PowerPC) processor (revision A0) with 204790K/57344K bytes of memory. Processor board ID FCZ1832D00Z PowerPC CPU at 800MHz, revision number 0x2151 Last reset from power-on LWAPP image version 7.6.100.0 1 Gigabit Ethernet interface 32K bytes of flash-simulated non-volatile configuration memory. Base ethernet MAC Address: 10:05:CA:63:F3:E9 Part Number : 73-14588-03 PCA Assembly Number : 800-37899-01 PCA Revision Number : B0 PCB Serial Number : FOC18190TPK Top Assembly Part Number : 800-38356-01 Top Assembly Serial Number : FCZ1832D00Z Top Revision Number : A0 Product/Model Number : AIR-CAP2602I-E-K9 % Please define a domain-name first. Press RETURN to get started! APAVC: Initial WLAN Buffers Given to System is 2500 APAVC: WlanPAKs 18174 RadioPaks 17566 *Mar 1 00:00:11.867: %LWAPP-3-CLIENTERRORLOG: Config load from flash failed. Initialising Cfg *Mar 1 00:00:13.947: %LINK-6-UPDOWN: Interface GigabitEthernet0, changed state to up *Mar 1 00:00:14.311: %SYS-5-RESTART: System restarted -- Cisco IOS Software, C2600 Software (AP3G2-RCVK9W8-M), Version 15.2(4)JB4, RELEASE SOFTWARE (fc1) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2014 by Cisco Systems, Inc. Compiled Thu 06-Mar-14 10:46 by prod_rel_team *Mar 1 00:00:14.351: %LWAPP-3-CLIENTERRORLOG: Config load from flash failed. Initialising Cfg *Mar 1 00:00:14.351: %CAPWAP-3-ERRORLOG: Failed to load configuration from flash. Resetting to default configl wapp_crypto_init: MIC Present and Parsed Successfully *Mar 1 00:00:14.475: %SSH-5-ENABLED: SSH 2.0 has been enabled *Mar 1 00:00:15.339: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, changed state to upERROR: Failed to configure ethernet promiscuous mode. Interface Descriptor mismatch *Mar 1 00:00:19.159: DPAA Initialization Complete *Mar 1 00:00:19.159: %SYS-3-HARIKARI: Process DPAA INIT top-level routine exited *Mar 1 00:00:20.159: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed state to up no bridge-group 1 source-learning ^ % Invalid input detected at '^' marker. %Default route without gateway, if not a point-to-point interface, may impact performance *Mar 1 00:00:33.087: %LWAPP-3-CLIENTERRORLOG: Config load from flash failed. Initialising Cfg Not in Bound state. *Mar 1 00:01:43.103: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP. User Access Verification Username: % Username: timeout expired! AP1005.ca63.f3e9 con0 is now available Press RETURN to get started. Not in Bound state. *Mar 1 00:02:33.103: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP. *Mar 1 00:02:38.491: %CDP_PD-4-POWER_OK: All radios disabled - NON_CISCO-NO_CDP_RECEIVED inline power source Not in Bound state. *Mar 1 00:03:23.103: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP. Not in Bound state. *Mar 1 00:04:13.103: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP. Not in Bound state. *Mar 1 00:05:03.103: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP. User Access Verification Username: Cisco Password: AP1005.ca63.f3e9> Not in Bound state. *Mar 1 00:05:53.103: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP. AP1005.ca63.f3e9>show ver Cisco IOS Software, C2600 Software (AP3G2-RCVK9W8-M), Version 15.2(4)JB4, RELEASE SOFTWARE (fc1) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2014 by Cisco Systems, Inc. Compiled Thu 06-Mar-14 10:46 by prod_rel_team ROM: Bootstrap program is C2600 boot loader BOOTLDR: C2600 Boot Loader (AP3G2-BOOT-M) LoaderVersion 12.4(25e)JAY, RELEASE SOFTWARE (fc1) AP1005.ca63.f3e9 uptime is 6 minutes System returned to ROM by power-on System image file is "flash:/ap3g2-rcvk9w8-mx/ap3g2-rcvk9w8-xx" Last reload reason: This product contains cryptographic features and is subject to United States and local country laws governing import, export, transfer and use. Delivery of Cisco cryptographic products does not imply third-party authority to import, export, distribute or use encryption. Importers, exporters, distributors and users are responsible for compliance with U.S. and local country laws. By using this product you --More-- Not in Bound state. *Mar 1 00:06:43.103: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP. Not in Bound state. *Mar 1 00:07:33.103: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP. Not in Boagree to comply with applicable laws and regulations. If you are unable --More-- *Mar 1 00:08:23.103: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewinto comply with U.S. an d local laws, return this product immediately. A summary of U.S. laws governing Cisco cryptographic products may be found at: http://www.cisco.com/wwl/export/crypto/tool/stqrg.html If you require further assistance please contact us by sending email to export@cisco.com. cisco AIR-CAP2602I-E-K9 (PowerPC) processor (revision A0) with 204790K/57344K bytes of memory. Processor board ID FCZ1832D00Z PowerPC CPU at 800MHz, revision number 0x2151 Last reset from power-on LWAPP image version 7.6.100.0 1 Gigabit Ethernet interface 32K bytes of flash-simulated non-volatile configuration memory. Base ethernet MAC Address: 10:05:CA:63:F3:E9 Part Number : 73-14588-03 PCA Assembly Number : 800-37899-01 PCA Revision Number : B0 PCB Serial Number : FOC18190TPK Top Assembly Part Number : 800-38356-01 Top Assembly Serial Number : FCZ1832D00Z Top Revision Number : A0 Product/Model Number : AIR-CAP2602I-E-K9 Configuration register is 0xF AP1005.ca63.f3e9> Not in Bound state. *Mar 1 00:09:13.103: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP. Not in Bound state. *Mar 1 00:10:03.103: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP. Not in Bound state. *Mar 1 00:10:53.103: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP. Not in Bound state. *Mar 1 00:11:43.103: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP. Not in Bound state. *Mar 1 00:12:33.103: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP. Not in Bound state. *Mar 1 00:13:23.103: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP. Not in Bound state. *Mar 1 00:14:13.103: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP. Not in Bound state. *Mar 1 00:15:03.103: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP. Not in Bound state. *Mar 1 00:15:53.103: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP. Not in Bound state. *Mar 1 00:16:43.103: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP. Not in Bound state. *Mar 1 00:17:33.103: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP. Not in Bound state. *Mar 1 00:18:23.103: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP. Not in Bound state. *Mar 1 00:19:13.103: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP. Not in Bound state. *Mar 1 00:20:03.103: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP. Not in Bound state. *Mar 1 00:20:53.103: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP. Not in Bound state. *Mar 1 00:21:43.103: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP. Not in Bound state. *Mar 1 00:22:33.103: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP. Not in Bound state. *Mar 1 00:23:23.103: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP. Not in Bound state. *Mar 1 00:24:13.103: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP. Not in Bound state. *Mar 1 00:25:03.103: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP. Not in Bound state. *Mar 1 00:25:53.103: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP. Not in Bound state. *Mar 1 00:26:43.103: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP. Not in Bound state. *Mar 1 00:27:33.103: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP. Not in Bound state. *Mar 1 00:28:23.103: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP. Not in Bound state. *Mar 1 00:29:13.103: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP. Not in Bound state. *Mar 1 00:30:03.103: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP. Not in Bound state. *Mar 1 00:30:53.103: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP. Not in Bound state. *Mar 1 00:31:43.103: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP. Not in Bound state. *Mar 1 00:32:33.103: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP. Not in Bound state. *Mar 1 00:33:23.103: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP. Not in Bound state. *Mar 1 00:34:13.103: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP. Not in Bound state. *Mar 1 00:35:03.103: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP. Not in Bound state. *Mar 1 00:35:53.103: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP. Not in Bound state. *Mar 1 00:36:43.103: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP. Not in Bound state. *Mar 1 00:37:33.103: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP. Not in Bound state. *Mar 1 00:38:23.103: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP. Not in Bound state. *Mar 1 00:39:13.103: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP. Not in Bound state. *Mar 1 00:40:03.103: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP. Not in Bound state. *Mar 1 00:40:53.103: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP. AP1005.ca63.f3e9> Not in Bound state. *Mar 1 00:41:43.103: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP. Not in Bound state. *Mar 1 00:42:33.103: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP. Not in Bound state. *Mar 1 00:43:23.103: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP.