Issue with adding UCS server to Prime Infrastructure 3.2

a.pednekar — Tue, 13 Nov 2018 05:57:15 GMT

HI Guys,

I have a Cisco UCS 220 M3 server which I am trying to add to Cisco Prime Infrastructure 3.2 for monitoring. One the UCS server I have enabled SNMP and configured a snmp v3 user

The device is added to Prime Infrastructure 3.2. I added it using a manual steps and also tried doing a discovery for the device. In either case I see the Last Inventory Collection status as "Partial Collection Failure".

I look up the logs and notice a Connection Timed out error while trying to make a http request. I notice when adding the device manually there is a tab to enter the Http/Https credentials. The verify credentials function always fails for this function. Which I believe is the cause of this issue, however I am not able to figure out the fix for this.

Has anyone encountered this before? or help me see what I am missing?

Re: Issue with adding UCS server to Prime Infrastructure 3.2

gpairait — Sat, 17 Nov 2018 11:13:48 GMT

Hi There,

you can try increasing the timeout values.
the max timeout value which can be set is 300sec.

hope that helps.

Thanks,
Gautami

Re: Issue with adding UCS server to Prime Infrastructure 3.2

orvain-l — Thu, 25 Apr 2019 12:17:49 GMT

where to increase https timeout ?

topic Issue with adding UCS server to Prime Infrastructure 3.2 in Network Management

Issue with adding UCS server to Prime Infrastructure 3.2

Re: Issue with adding UCS server to Prime Infrastructure 3.2

Re: Issue with adding UCS server to Prime Infrastructure 3.2