topic ATA 186 configuration in IP Telephony and Phones

ATA 186 configuration

Nizam.Ahmed — Thu, 04 Apr 2019 04:54:50 GMT

Hi Expert,

Hope you are doing good.

I believe in this forum there are so many engineers who solved the ATA 186 configuration. I would like to draw their attention.

ATA 186 is not registering with cucm. I am using cucm10.5. So far the document I've found is not working. It is mentioned that some fields are not same as the documents. please see the attachments of my ATA 186 device's interface.

waiting for your suggestion. Thanks in advance.

Thanks & regards

Nizam

Re: ATA 186 configuration

Chris Deren — Thu, 04 Apr 2019 12:42:08 GMT

This is very OLD firmware running on the ATA, you may need to consider upgrading the firmware manually before you attempt to register to CUCM 10.5. There are many documents on the web with directions on how to do that.

Re: ATA 186 configuration

Nizam.Ahmed — Wed, 08 May 2019 10:29:05 GMT

Hi Chris Deren,

Finally I able to configure ATA device Al'hamdulillah.

Thanks for your suggestion.

Nizam