<?xml version="1.0" encoding="UTF-8"?>
<rss xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#" xmlns:taxo="http://purl.org/rss/1.0/modules/taxonomy/" version="2.0">
  <channel>
    <title>topic Mitel phone not getting ip from voice vlan its getting from data vlan in IP Telephony and Phones</title>
    <link>https://community.cisco.com/t5/ip-telephony-and-phones/mitel-phone-not-getting-ip-from-voice-vlan-its-getting-from-data/m-p/4866525#M410740</link>
    <description>&lt;P&gt;Mitel phone not getting ip address from voice vlan its getting from data vlan via windows dhcp on cisco switch c9200&lt;/P&gt;&lt;P&gt;login as: magit&lt;BR /&gt;Keyboard-interactive authentication prompts from server:&lt;BR /&gt;| Password:&lt;BR /&gt;End of keyboard-interactive prompts from server&lt;/P&gt;&lt;P&gt;&amp;nbsp;&lt;/P&gt;&lt;P&gt;SW-c9200&amp;gt;en&lt;BR /&gt;Password:&lt;BR /&gt;SW-c9200#show ru&lt;BR /&gt;SW-c9200#show running-config&lt;BR /&gt;Building configuration...&lt;/P&gt;&lt;P&gt;&lt;BR /&gt;!&lt;BR /&gt;ip routing&lt;BR /&gt;!&lt;BR /&gt;ip domain name nawanco.com&lt;BR /&gt;!&lt;BR /&gt;!&lt;BR /&gt;!&lt;BR /&gt;login on-success log&lt;BR /&gt;ipv6 unicast-routing&lt;BR /&gt;call-home&lt;BR /&gt;! If contact email address in call-home is configured as sch-smart-licensing@cisco.com&lt;BR /&gt;! the email address configured in Cisco Smart License Portal will be used as contact email address to send SCH notifications.&lt;BR /&gt;contact-email-addr sch-smart-licensing@cisco.com&lt;BR /&gt;profile "CiscoTAC-1"&lt;BR /&gt;active&lt;BR /&gt;destination transport-method http&lt;BR /&gt;no destination transport-method email&lt;BR /&gt;no device-tracking logging theft&lt;BR /&gt;!&lt;BR /&gt;table-map AutoQos-4.0-Trust-Dscp-Table&lt;BR /&gt;default copy&lt;BR /&gt;table-map AutoQos-4.0-Trust-Cos-Table&lt;BR /&gt;default copy&lt;/P&gt;&lt;P&gt;license boot level network-essentials addon dna-essentials&lt;BR /&gt;!&lt;BR /&gt;!&lt;BR /&gt;diagnostic bootup level minimal&lt;BR /&gt;!&lt;BR /&gt;spanning-tree mode rapid-pvst&lt;BR /&gt;spanning-tree extend system-id&lt;BR /&gt;memory free low-watermark processor 10055&lt;BR /&gt;!&lt;/P&gt;&lt;P&gt;!&lt;BR /&gt;redundancy&lt;BR /&gt;mode sso&lt;BR /&gt;!&lt;BR /&gt;lldp run&lt;BR /&gt;!&lt;BR /&gt;!&lt;BR /&gt;class-map match-any system-cpp-police-ewlc-control&lt;BR /&gt;description EWLC Control&lt;BR /&gt;class-map match-any AutoQos-4.0-Output-Multimedia-Conf-Queue&lt;BR /&gt;match dscp af41 af42 af43&lt;BR /&gt;match cos 4&lt;BR /&gt;class-map match-any system-cpp-police-topology-control&lt;BR /&gt;description Topology control&lt;BR /&gt;class-map match-any system-cpp-police-sw-forward&lt;BR /&gt;description Sw forwarding, L2 LVX data packets, LOGGING, Transit Traffic&lt;BR /&gt;class-map match-any AutoQos-4.0-Output-Bulk-Data-Queue&lt;BR /&gt;match dscp af11 af12 af13&lt;BR /&gt;match cos 1&lt;BR /&gt;class-map match-any system-cpp-default&lt;BR /&gt;description EWLC data, Inter FED Traffic&lt;BR /&gt;class-map match-any system-cpp-police-sys-data&lt;BR /&gt;description Openflow, Exception, EGR Exception, NFL Sampled Data, RPF Failed&lt;BR /&gt;class-map match-any AutoQos-4.0-Output-Priority-Queue&lt;BR /&gt;match dscp cs4 cs5 ef&lt;BR /&gt;match cos 5&lt;BR /&gt;class-map match-any system-cpp-police-punt-webauth&lt;BR /&gt;description Punt Webauth&lt;BR /&gt;class-map match-any AutoQos-4.0-Output-Multimedia-Strm-Queue&lt;BR /&gt;match dscp af31 af32 af33&lt;BR /&gt;class-map match-any system-cpp-police-l2lvx-control&lt;BR /&gt;description L2 LVX control packets&lt;BR /&gt;class-map match-any system-cpp-police-forus&lt;BR /&gt;description Forus Address resolution and Forus traffic&lt;BR /&gt;class-map match-any system-cpp-police-multicast-end-station&lt;BR /&gt;description MCAST END STATION&lt;BR /&gt;class-map match-any system-cpp-police-high-rate-app&lt;BR /&gt;description High Rate Applications&lt;BR /&gt;class-map match-any system-cpp-police-multicast&lt;BR /&gt;description MCAST Data&lt;BR /&gt;class-map match-any system-cpp-police-l2-control&lt;BR /&gt;description L2 control&lt;BR /&gt;class-map match-any system-cpp-police-dot1x-auth&lt;BR /&gt;description DOT1X Auth&lt;BR /&gt;class-map match-any system-cpp-police-data&lt;BR /&gt;description ICMP redirect, ICMP_GEN and BROADCAST&lt;BR /&gt;class-map match-all AutoQoS-VoIP-RTP-Trust&lt;BR /&gt;match ip dscp ef&lt;BR /&gt;class-map match-any system-cpp-police-stackwise-virt-control&lt;BR /&gt;description Stackwise Virtual OOB&lt;BR /&gt;class-map match-all AutoQoS-VoIP-Control-Trust&lt;BR /&gt;match ip dscp cs3 af31&lt;BR /&gt;class-map match-any non-client-nrt-class&lt;BR /&gt;class-map match-any system-cpp-police-routing-control&lt;BR /&gt;description Routing control and Low Latency&lt;BR /&gt;class-map match-any system-cpp-police-protocol-snooping&lt;BR /&gt;description Protocol snooping&lt;BR /&gt;class-map match-any AutoQos-4.0-Output-Trans-Data-Queue&lt;BR /&gt;match dscp af21 af22 af23&lt;BR /&gt;match cos 2&lt;BR /&gt;class-map match-any system-cpp-police-dhcp-snooping&lt;BR /&gt;description DHCP snooping&lt;BR /&gt;class-map match-any system-cpp-police-ios-routing&lt;BR /&gt;description L2 control, Topology control, Routing control, Low Latency&lt;BR /&gt;class-map match-any system-cpp-police-system-critical&lt;BR /&gt;description System Critical and Gold Pkt&lt;BR /&gt;class-map match-any AutoQos-4.0-Output-Scavenger-Queue&lt;BR /&gt;match dscp cs1&lt;BR /&gt;class-map match-any system-cpp-police-ios-feature&lt;BR /&gt;description ICMPGEN,BROADCAST,ICMP,L2LVXCntrl,ProtoSnoop,PuntWebauth,MCASTData,Transit,DOT1XAuth,Swfwd,LOGGING,L2LVXData,ForusTraffic,ForusARP,McastEndStn,Openflow,Exception,EGRExcption,NflSampled,RpfFailed&lt;BR /&gt;class-map match-any AutoQos-4.0-Output-Control-Mgmt-Queue&lt;BR /&gt;match dscp cs2 cs3 cs6 cs7&lt;BR /&gt;match cos 3&lt;BR /&gt;!&lt;BR /&gt;policy-map AutoQos-4.0-Output-Policy&lt;BR /&gt;class AutoQos-4.0-Output-Priority-Queue&lt;BR /&gt;priority level 1 percent 30&lt;BR /&gt;class AutoQos-4.0-Output-Control-Mgmt-Queue&lt;BR /&gt;bandwidth remaining percent 10&lt;BR /&gt;queue-limit dscp cs2 percent 80&lt;BR /&gt;queue-limit dscp cs3 percent 90&lt;BR /&gt;queue-limit dscp cs6 percent 100&lt;BR /&gt;queue-limit dscp cs7 percent 100&lt;BR /&gt;queue-buffers ratio 10&lt;BR /&gt;class AutoQos-4.0-Output-Multimedia-Conf-Queue&lt;BR /&gt;bandwidth remaining percent 10&lt;BR /&gt;queue-buffers ratio 10&lt;BR /&gt;class AutoQos-4.0-Output-Trans-Data-Queue&lt;BR /&gt;bandwidth remaining percent 10&lt;BR /&gt;queue-buffers ratio 10&lt;BR /&gt;class AutoQos-4.0-Output-Bulk-Data-Queue&lt;BR /&gt;bandwidth remaining percent 4&lt;BR /&gt;queue-buffers ratio 10&lt;BR /&gt;class AutoQos-4.0-Output-Scavenger-Queue&lt;BR /&gt;bandwidth remaining percent 1&lt;BR /&gt;queue-buffers ratio 10&lt;BR /&gt;class AutoQos-4.0-Output-Multimedia-Strm-Queue&lt;BR /&gt;bandwidth remaining percent 10&lt;BR /&gt;queue-buffers ratio 10&lt;BR /&gt;class class-default&lt;BR /&gt;bandwidth remaining percent 25&lt;BR /&gt;queue-buffers ratio 25&lt;BR /&gt;policy-map AutoQos-4.0-Trust-Cos-Input-Policy&lt;BR /&gt;class class-default&lt;BR /&gt;set cos cos table AutoQos-4.0-Trust-Cos-Table&lt;BR /&gt;policy-map system-cpp-policy&lt;BR /&gt;policy-map AutoQos-4.0-Trust-Dscp-Input-Policy&lt;BR /&gt;class class-default&lt;BR /&gt;set dscp dscp table AutoQos-4.0-Trust-Dscp-Table&lt;BR /&gt;policy-map AutoQoS-Police-CiscoPhone&lt;BR /&gt;class AutoQoS-VoIP-RTP-Trust&lt;BR /&gt;set dscp ef&lt;BR /&gt;class AutoQoS-VoIP-Control-Trust&lt;BR /&gt;set dscp cs3&lt;BR /&gt;!&lt;/P&gt;&lt;P&gt;interface GigabitEthernet0/0&lt;BR /&gt;vrf forwarding Mgmt-vrf&lt;BR /&gt;ip address dhcp&lt;BR /&gt;negotiation auto&lt;BR /&gt;!&lt;BR /&gt;interface GigabitEthernet1/0/1 (connected to Mitel Controller as Source)&lt;BR /&gt;switchport access vlan 41&lt;BR /&gt;switchport mode access&lt;BR /&gt;switchport voice vlan dot1p&lt;BR /&gt;no cdp enable&lt;BR /&gt;auto qos trust dscp&lt;BR /&gt;spanning-tree portfast&lt;BR /&gt;service-policy input AutoQos-4.0-Trust-Dscp-Input-Policy&lt;BR /&gt;service-policy output AutoQos-4.0-Output-Policy&lt;BR /&gt;!&lt;BR /&gt;interface GigabitEthernet1/0/2&lt;/P&gt;&lt;P&gt;!&lt;BR /&gt;interface GigabitEthernet1/0/3 (connected to Windows DHCP Server)&lt;BR /&gt;switchport access vlan 40&lt;BR /&gt;switchport mode access&lt;BR /&gt;!&lt;BR /&gt;interface GigabitEthernet1/0/4 (connected to Mitel phone 6905)&lt;BR /&gt;description link nawan-Mitel&lt;BR /&gt;switchport access vlan 40&lt;BR /&gt;switchport mode access&lt;BR /&gt;switchport voice vlan 41&lt;BR /&gt;spanning-tree portfast&lt;/P&gt;&lt;P&gt;!&lt;BR /&gt;interface GigabitEthernet1/0/23&lt;BR /&gt;switchport mode trunk&lt;BR /&gt;spanning-tree portfast&lt;BR /&gt;!&lt;BR /&gt;interface GigabitEthernet1/0/24 ( Connected to Firewall for manage External Traffic 172.16.240.50)&amp;nbsp;&lt;BR /&gt;switchport access vlan 40&lt;BR /&gt;spanning-tree portfast&lt;BR /&gt;!&lt;BR /&gt;interface GigabitEthernet1/1/1&lt;BR /&gt;!&lt;BR /&gt;interface GigabitEthernet1/1/2&lt;BR /&gt;!&lt;BR /&gt;interface GigabitEthernet1/1/3&lt;BR /&gt;!&lt;BR /&gt;interface GigabitEthernet1/1/4&lt;BR /&gt;!&lt;BR /&gt;interface Vlan1&lt;BR /&gt;no ip address&lt;BR /&gt;ipv6 address autoconfig&lt;BR /&gt;ipv6 enable&lt;BR /&gt;ipv6 nd autoconfig default-route&lt;BR /&gt;ipv6 dhcp client request vendor&lt;BR /&gt;!&lt;BR /&gt;interface Vlan40&lt;BR /&gt;description Data&lt;BR /&gt;ip address 172.16.240.9 255.255.255.0&lt;BR /&gt;ip helper-address 172.16.240.100&lt;BR /&gt;!&lt;BR /&gt;interface Vlan41&lt;BR /&gt;description MitelPBX&lt;BR /&gt;ip address 192.168.250.254 255.255.255.0&lt;BR /&gt;ip helper-address 172.16.240.100&lt;BR /&gt;no ip route-cache&lt;BR /&gt;!&lt;BR /&gt;ip forward-protocol nd&lt;BR /&gt;ip http server&lt;BR /&gt;ip http authentication local&lt;BR /&gt;ip http secure-server&lt;BR /&gt;ip route 0.0.0.0 0.0.0.0 172.16.240.50&lt;BR /&gt;ip tftp source-interface Vlan1&lt;BR /&gt;!&lt;BR /&gt;!&lt;BR /&gt;!&lt;BR /&gt;!&lt;BR /&gt;control-plane&lt;BR /&gt;service-policy input system-cpp-policy&lt;/P&gt;&lt;P&gt;SW-c9200#&lt;/P&gt;</description>
    <pubDate>Mon, 03 Jul 2023 13:08:19 GMT</pubDate>
    <dc:creator>sarfarazqadry2008</dc:creator>
    <dc:date>2023-07-03T13:08:19Z</dc:date>
    <item>
      <title>Mitel phone not getting ip from voice vlan its getting from data vlan</title>
      <link>https://community.cisco.com/t5/ip-telephony-and-phones/mitel-phone-not-getting-ip-from-voice-vlan-its-getting-from-data/m-p/4866525#M410740</link>
      <description>&lt;P&gt;Mitel phone not getting ip address from voice vlan its getting from data vlan via windows dhcp on cisco switch c9200&lt;/P&gt;&lt;P&gt;login as: magit&lt;BR /&gt;Keyboard-interactive authentication prompts from server:&lt;BR /&gt;| Password:&lt;BR /&gt;End of keyboard-interactive prompts from server&lt;/P&gt;&lt;P&gt;&amp;nbsp;&lt;/P&gt;&lt;P&gt;SW-c9200&amp;gt;en&lt;BR /&gt;Password:&lt;BR /&gt;SW-c9200#show ru&lt;BR /&gt;SW-c9200#show running-config&lt;BR /&gt;Building configuration...&lt;/P&gt;&lt;P&gt;&lt;BR /&gt;!&lt;BR /&gt;ip routing&lt;BR /&gt;!&lt;BR /&gt;ip domain name nawanco.com&lt;BR /&gt;!&lt;BR /&gt;!&lt;BR /&gt;!&lt;BR /&gt;login on-success log&lt;BR /&gt;ipv6 unicast-routing&lt;BR /&gt;call-home&lt;BR /&gt;! If contact email address in call-home is configured as sch-smart-licensing@cisco.com&lt;BR /&gt;! the email address configured in Cisco Smart License Portal will be used as contact email address to send SCH notifications.&lt;BR /&gt;contact-email-addr sch-smart-licensing@cisco.com&lt;BR /&gt;profile "CiscoTAC-1"&lt;BR /&gt;active&lt;BR /&gt;destination transport-method http&lt;BR /&gt;no destination transport-method email&lt;BR /&gt;no device-tracking logging theft&lt;BR /&gt;!&lt;BR /&gt;table-map AutoQos-4.0-Trust-Dscp-Table&lt;BR /&gt;default copy&lt;BR /&gt;table-map AutoQos-4.0-Trust-Cos-Table&lt;BR /&gt;default copy&lt;/P&gt;&lt;P&gt;license boot level network-essentials addon dna-essentials&lt;BR /&gt;!&lt;BR /&gt;!&lt;BR /&gt;diagnostic bootup level minimal&lt;BR /&gt;!&lt;BR /&gt;spanning-tree mode rapid-pvst&lt;BR /&gt;spanning-tree extend system-id&lt;BR /&gt;memory free low-watermark processor 10055&lt;BR /&gt;!&lt;/P&gt;&lt;P&gt;!&lt;BR /&gt;redundancy&lt;BR /&gt;mode sso&lt;BR /&gt;!&lt;BR /&gt;lldp run&lt;BR /&gt;!&lt;BR /&gt;!&lt;BR /&gt;class-map match-any system-cpp-police-ewlc-control&lt;BR /&gt;description EWLC Control&lt;BR /&gt;class-map match-any AutoQos-4.0-Output-Multimedia-Conf-Queue&lt;BR /&gt;match dscp af41 af42 af43&lt;BR /&gt;match cos 4&lt;BR /&gt;class-map match-any system-cpp-police-topology-control&lt;BR /&gt;description Topology control&lt;BR /&gt;class-map match-any system-cpp-police-sw-forward&lt;BR /&gt;description Sw forwarding, L2 LVX data packets, LOGGING, Transit Traffic&lt;BR /&gt;class-map match-any AutoQos-4.0-Output-Bulk-Data-Queue&lt;BR /&gt;match dscp af11 af12 af13&lt;BR /&gt;match cos 1&lt;BR /&gt;class-map match-any system-cpp-default&lt;BR /&gt;description EWLC data, Inter FED Traffic&lt;BR /&gt;class-map match-any system-cpp-police-sys-data&lt;BR /&gt;description Openflow, Exception, EGR Exception, NFL Sampled Data, RPF Failed&lt;BR /&gt;class-map match-any AutoQos-4.0-Output-Priority-Queue&lt;BR /&gt;match dscp cs4 cs5 ef&lt;BR /&gt;match cos 5&lt;BR /&gt;class-map match-any system-cpp-police-punt-webauth&lt;BR /&gt;description Punt Webauth&lt;BR /&gt;class-map match-any AutoQos-4.0-Output-Multimedia-Strm-Queue&lt;BR /&gt;match dscp af31 af32 af33&lt;BR /&gt;class-map match-any system-cpp-police-l2lvx-control&lt;BR /&gt;description L2 LVX control packets&lt;BR /&gt;class-map match-any system-cpp-police-forus&lt;BR /&gt;description Forus Address resolution and Forus traffic&lt;BR /&gt;class-map match-any system-cpp-police-multicast-end-station&lt;BR /&gt;description MCAST END STATION&lt;BR /&gt;class-map match-any system-cpp-police-high-rate-app&lt;BR /&gt;description High Rate Applications&lt;BR /&gt;class-map match-any system-cpp-police-multicast&lt;BR /&gt;description MCAST Data&lt;BR /&gt;class-map match-any system-cpp-police-l2-control&lt;BR /&gt;description L2 control&lt;BR /&gt;class-map match-any system-cpp-police-dot1x-auth&lt;BR /&gt;description DOT1X Auth&lt;BR /&gt;class-map match-any system-cpp-police-data&lt;BR /&gt;description ICMP redirect, ICMP_GEN and BROADCAST&lt;BR /&gt;class-map match-all AutoQoS-VoIP-RTP-Trust&lt;BR /&gt;match ip dscp ef&lt;BR /&gt;class-map match-any system-cpp-police-stackwise-virt-control&lt;BR /&gt;description Stackwise Virtual OOB&lt;BR /&gt;class-map match-all AutoQoS-VoIP-Control-Trust&lt;BR /&gt;match ip dscp cs3 af31&lt;BR /&gt;class-map match-any non-client-nrt-class&lt;BR /&gt;class-map match-any system-cpp-police-routing-control&lt;BR /&gt;description Routing control and Low Latency&lt;BR /&gt;class-map match-any system-cpp-police-protocol-snooping&lt;BR /&gt;description Protocol snooping&lt;BR /&gt;class-map match-any AutoQos-4.0-Output-Trans-Data-Queue&lt;BR /&gt;match dscp af21 af22 af23&lt;BR /&gt;match cos 2&lt;BR /&gt;class-map match-any system-cpp-police-dhcp-snooping&lt;BR /&gt;description DHCP snooping&lt;BR /&gt;class-map match-any system-cpp-police-ios-routing&lt;BR /&gt;description L2 control, Topology control, Routing control, Low Latency&lt;BR /&gt;class-map match-any system-cpp-police-system-critical&lt;BR /&gt;description System Critical and Gold Pkt&lt;BR /&gt;class-map match-any AutoQos-4.0-Output-Scavenger-Queue&lt;BR /&gt;match dscp cs1&lt;BR /&gt;class-map match-any system-cpp-police-ios-feature&lt;BR /&gt;description ICMPGEN,BROADCAST,ICMP,L2LVXCntrl,ProtoSnoop,PuntWebauth,MCASTData,Transit,DOT1XAuth,Swfwd,LOGGING,L2LVXData,ForusTraffic,ForusARP,McastEndStn,Openflow,Exception,EGRExcption,NflSampled,RpfFailed&lt;BR /&gt;class-map match-any AutoQos-4.0-Output-Control-Mgmt-Queue&lt;BR /&gt;match dscp cs2 cs3 cs6 cs7&lt;BR /&gt;match cos 3&lt;BR /&gt;!&lt;BR /&gt;policy-map AutoQos-4.0-Output-Policy&lt;BR /&gt;class AutoQos-4.0-Output-Priority-Queue&lt;BR /&gt;priority level 1 percent 30&lt;BR /&gt;class AutoQos-4.0-Output-Control-Mgmt-Queue&lt;BR /&gt;bandwidth remaining percent 10&lt;BR /&gt;queue-limit dscp cs2 percent 80&lt;BR /&gt;queue-limit dscp cs3 percent 90&lt;BR /&gt;queue-limit dscp cs6 percent 100&lt;BR /&gt;queue-limit dscp cs7 percent 100&lt;BR /&gt;queue-buffers ratio 10&lt;BR /&gt;class AutoQos-4.0-Output-Multimedia-Conf-Queue&lt;BR /&gt;bandwidth remaining percent 10&lt;BR /&gt;queue-buffers ratio 10&lt;BR /&gt;class AutoQos-4.0-Output-Trans-Data-Queue&lt;BR /&gt;bandwidth remaining percent 10&lt;BR /&gt;queue-buffers ratio 10&lt;BR /&gt;class AutoQos-4.0-Output-Bulk-Data-Queue&lt;BR /&gt;bandwidth remaining percent 4&lt;BR /&gt;queue-buffers ratio 10&lt;BR /&gt;class AutoQos-4.0-Output-Scavenger-Queue&lt;BR /&gt;bandwidth remaining percent 1&lt;BR /&gt;queue-buffers ratio 10&lt;BR /&gt;class AutoQos-4.0-Output-Multimedia-Strm-Queue&lt;BR /&gt;bandwidth remaining percent 10&lt;BR /&gt;queue-buffers ratio 10&lt;BR /&gt;class class-default&lt;BR /&gt;bandwidth remaining percent 25&lt;BR /&gt;queue-buffers ratio 25&lt;BR /&gt;policy-map AutoQos-4.0-Trust-Cos-Input-Policy&lt;BR /&gt;class class-default&lt;BR /&gt;set cos cos table AutoQos-4.0-Trust-Cos-Table&lt;BR /&gt;policy-map system-cpp-policy&lt;BR /&gt;policy-map AutoQos-4.0-Trust-Dscp-Input-Policy&lt;BR /&gt;class class-default&lt;BR /&gt;set dscp dscp table AutoQos-4.0-Trust-Dscp-Table&lt;BR /&gt;policy-map AutoQoS-Police-CiscoPhone&lt;BR /&gt;class AutoQoS-VoIP-RTP-Trust&lt;BR /&gt;set dscp ef&lt;BR /&gt;class AutoQoS-VoIP-Control-Trust&lt;BR /&gt;set dscp cs3&lt;BR /&gt;!&lt;/P&gt;&lt;P&gt;interface GigabitEthernet0/0&lt;BR /&gt;vrf forwarding Mgmt-vrf&lt;BR /&gt;ip address dhcp&lt;BR /&gt;negotiation auto&lt;BR /&gt;!&lt;BR /&gt;interface GigabitEthernet1/0/1 (connected to Mitel Controller as Source)&lt;BR /&gt;switchport access vlan 41&lt;BR /&gt;switchport mode access&lt;BR /&gt;switchport voice vlan dot1p&lt;BR /&gt;no cdp enable&lt;BR /&gt;auto qos trust dscp&lt;BR /&gt;spanning-tree portfast&lt;BR /&gt;service-policy input AutoQos-4.0-Trust-Dscp-Input-Policy&lt;BR /&gt;service-policy output AutoQos-4.0-Output-Policy&lt;BR /&gt;!&lt;BR /&gt;interface GigabitEthernet1/0/2&lt;/P&gt;&lt;P&gt;!&lt;BR /&gt;interface GigabitEthernet1/0/3 (connected to Windows DHCP Server)&lt;BR /&gt;switchport access vlan 40&lt;BR /&gt;switchport mode access&lt;BR /&gt;!&lt;BR /&gt;interface GigabitEthernet1/0/4 (connected to Mitel phone 6905)&lt;BR /&gt;description link nawan-Mitel&lt;BR /&gt;switchport access vlan 40&lt;BR /&gt;switchport mode access&lt;BR /&gt;switchport voice vlan 41&lt;BR /&gt;spanning-tree portfast&lt;/P&gt;&lt;P&gt;!&lt;BR /&gt;interface GigabitEthernet1/0/23&lt;BR /&gt;switchport mode trunk&lt;BR /&gt;spanning-tree portfast&lt;BR /&gt;!&lt;BR /&gt;interface GigabitEthernet1/0/24 ( Connected to Firewall for manage External Traffic 172.16.240.50)&amp;nbsp;&lt;BR /&gt;switchport access vlan 40&lt;BR /&gt;spanning-tree portfast&lt;BR /&gt;!&lt;BR /&gt;interface GigabitEthernet1/1/1&lt;BR /&gt;!&lt;BR /&gt;interface GigabitEthernet1/1/2&lt;BR /&gt;!&lt;BR /&gt;interface GigabitEthernet1/1/3&lt;BR /&gt;!&lt;BR /&gt;interface GigabitEthernet1/1/4&lt;BR /&gt;!&lt;BR /&gt;interface Vlan1&lt;BR /&gt;no ip address&lt;BR /&gt;ipv6 address autoconfig&lt;BR /&gt;ipv6 enable&lt;BR /&gt;ipv6 nd autoconfig default-route&lt;BR /&gt;ipv6 dhcp client request vendor&lt;BR /&gt;!&lt;BR /&gt;interface Vlan40&lt;BR /&gt;description Data&lt;BR /&gt;ip address 172.16.240.9 255.255.255.0&lt;BR /&gt;ip helper-address 172.16.240.100&lt;BR /&gt;!&lt;BR /&gt;interface Vlan41&lt;BR /&gt;description MitelPBX&lt;BR /&gt;ip address 192.168.250.254 255.255.255.0&lt;BR /&gt;ip helper-address 172.16.240.100&lt;BR /&gt;no ip route-cache&lt;BR /&gt;!&lt;BR /&gt;ip forward-protocol nd&lt;BR /&gt;ip http server&lt;BR /&gt;ip http authentication local&lt;BR /&gt;ip http secure-server&lt;BR /&gt;ip route 0.0.0.0 0.0.0.0 172.16.240.50&lt;BR /&gt;ip tftp source-interface Vlan1&lt;BR /&gt;!&lt;BR /&gt;!&lt;BR /&gt;!&lt;BR /&gt;!&lt;BR /&gt;control-plane&lt;BR /&gt;service-policy input system-cpp-policy&lt;/P&gt;&lt;P&gt;SW-c9200#&lt;/P&gt;</description>
      <pubDate>Mon, 03 Jul 2023 13:08:19 GMT</pubDate>
      <guid>https://community.cisco.com/t5/ip-telephony-and-phones/mitel-phone-not-getting-ip-from-voice-vlan-its-getting-from-data/m-p/4866525#M410740</guid>
      <dc:creator>sarfarazqadry2008</dc:creator>
      <dc:date>2023-07-03T13:08:19Z</dc:date>
    </item>
    <item>
      <title>Re: Mitel phone not getting ip from voice vlan its getting from data v</title>
      <link>https://community.cisco.com/t5/ip-telephony-and-phones/mitel-phone-not-getting-ip-from-voice-vlan-its-getting-from-data/m-p/4866866#M410744</link>
      <description>&lt;P&gt;Why are you posting this question in a &lt;STRONG&gt;Cisco Collaboration&lt;/STRONG&gt; forum?&lt;BR /&gt;First: It has nothing to do with Cisco phones.&lt;BR /&gt;Second: If you have problems with your Switch / Router config, then why don't you post it in the networking forum?&lt;BR /&gt;Third: Have you even checked, if your 3rd party phone supports LLDP, understands the concept of "voice lan", ...? You can't just plug it in like a Cisco phone and expect everything to work the same way.&lt;/P&gt;</description>
      <pubDate>Tue, 04 Jul 2023 06:20:19 GMT</pubDate>
      <guid>https://community.cisco.com/t5/ip-telephony-and-phones/mitel-phone-not-getting-ip-from-voice-vlan-its-getting-from-data/m-p/4866866#M410744</guid>
      <dc:creator>b.winter</dc:creator>
      <dc:date>2023-07-04T06:20:19Z</dc:date>
    </item>
    <item>
      <title>Re: Mitel phone not getting ip from voice vlan its getting from data v</title>
      <link>https://community.cisco.com/t5/ip-telephony-and-phones/mitel-phone-not-getting-ip-from-voice-vlan-its-getting-from-data/m-p/4866961#M410747</link>
      <description>&lt;P&gt;Hi &lt;a href="https://community.cisco.com/t5/user/viewprofilepage/user-id/1542393"&gt;@sarfarazqadry2008&lt;/a&gt;&amp;nbsp;&lt;/P&gt;
&lt;P&gt;&amp;nbsp;If your Mitel phone is getting IP address on the Access Vlan, why dont you send the informations it needs through the DHCP option and allow it to join your Mitel Voip system?&lt;/P&gt;
&lt;P&gt;The Voice vlan it is a feature used for Cisco phone but may not be a requirement for Mitel&amp;nbsp; phones.&lt;/P&gt;
&lt;P&gt;"The voice VLAN feature permits the switch ports to carry voice traffic with Layer 3 IP precedence and Layer 2 class of service (CoS) values from an IP phone. Based on &lt;STRONG&gt;IEEE 802.1p CoS&lt;/STRONG&gt;, the switch supports quality of service (QoS) which uses classification and scheduling to send network traffic from the switch. You can configure the Cisco IP phone to forward traffic with an IEEE 802.1p priority, and configure the switch to trust or override the traffic priority assigned by an IP phone."&lt;/P&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;</description>
      <pubDate>Tue, 04 Jul 2023 10:46:20 GMT</pubDate>
      <guid>https://community.cisco.com/t5/ip-telephony-and-phones/mitel-phone-not-getting-ip-from-voice-vlan-its-getting-from-data/m-p/4866961#M410747</guid>
      <dc:creator>Flavio Miranda</dc:creator>
      <dc:date>2023-07-04T10:46:20Z</dc:date>
    </item>
  </channel>
</rss>

