topic PPP Multilink Limitations in Routing https://community.cisco.com/t5/routing/ppp-multilink-limitations/m-p/722842#M44468 <P>We are looking ad bonding 8 T1s using a PPP Multilink on either a 2800 or 3800 series router. Is there a limitation on the number of T1s I can bond together and is there a router limitation? For example can a 2821 router only support 6 T1s bonded while a 2851 supports 8-10 and a 3825 support 12-15? </P><P></P><P>Any input would be appreciated.</P><P></P><P>THANKS in advance.</P><P></P><P>Scott</P> Mon, 04 Mar 2019 01:14:45 GMT snagelipphone 2019-03-04T01:14:45Z PPP Multilink Limitations https://community.cisco.com/t5/routing/ppp-multilink-limitations/m-p/722842#M44468 <P>We are looking ad bonding 8 T1s using a PPP Multilink on either a 2800 or 3800 series router. Is there a limitation on the number of T1s I can bond together and is there a router limitation? For example can a 2821 router only support 6 T1s bonded while a 2851 supports 8-10 and a 3825 support 12-15? </P><P></P><P>Any input would be appreciated.</P><P></P><P>THANKS in advance.</P><P></P><P>Scott</P> Mon, 04 Mar 2019 01:14:45 GMT https://community.cisco.com/t5/routing/ppp-multilink-limitations/m-p/722842#M44468 snagelipphone 2019-03-04T01:14:45Z Re: PPP Multilink Limitations https://community.cisco.com/t5/routing/ppp-multilink-limitations/m-p/722843#M44469 <HTML><HEAD></HEAD><BODY><P>Hello,</P><P>Generally there is a limit of 12 circuits per bundle, even on bigger platforms that the ones you mentioned. </P><P></P><P><I>Hope this helps, please rate post if it does!</I></P></BODY></HTML> Fri, 01 Jun 2007 00:15:38 GMT https://community.cisco.com/t5/routing/ppp-multilink-limitations/m-p/722843#M44469 paolo bevilacqua 2007-06-01T00:15:38Z