topic CUCM 10.5 installation issue in microsoft hyper-v in Collaboration Applications

CUCM 10.5 installation issue in microsoft hyper-v

Nizam.Ahmed — Sun, 10 Feb 2019 07:08:11 GMT

Hi experts,

Hope you are doing good.

I am facing problem during cucm installation in microsoft hyper-v. A message is showing during installation as "This hardware (or a combination thereof) is not supported by red hat" and then "The hardware you are using is not supported for this product. installation will now halted".

It is mentioned that image file is ok which i already installed in vmware workstation as well as esxi.

Please suggest me the way out. Hope many guys like me will be benefited. Thanks in advance.

Nizam

Re: CUCM 10.5 installation issue in microsoft hyper-v

Ratheesh Kumar — Sun, 10 Feb 2019 07:48:18 GMT

Hi there

Other virtualization vendors/products are not supported at this time (e.g. Microsoft Hyper-V, Citrix Xen, Red Hat KVM, etc.).

Virtualization Software Requirements-
https://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/uc_system/virtualization/virtualization-software-requirements.html

Virtualization for Cisco Unified Communications Manager (CUCM)-
https://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/uc_system/virtualization/virtualization-cisco-unified-communications-manager.html

If you are installing for lab or educational purpose (with the intention of no TAC support) please check out this link

https://uc.lawedo.net/2009/08/installing-cucm-7-on-hyper-v.html?m=1

Hope this Helps
Cheers
Rath!

***Please rate helpful posts***

Re: CUCM 10.5 installation issue in microsoft hyper-v

dm — Thu, 28 Nov 2019 07:11:51 GMT

Is there any technical reason why it is not supported? Why it is impossible to run linux on linux kvm?

Re: CUCM 10.5 installation issue in microsoft hyper-v

Nizam.Ahmed — Sat, 30 Nov 2019 07:27:15 GMT

Hi dm,

I love to think simply. So I would like to say that the cucm version you asked for was not made compatible with hyper-v. Might be some business issues with Microsoft. Whatever it is you can practice it in VMware workstation. If you have hyper-v but not VMware you can install it woin VMwarer workstation.

* So far I know from v12 cucm is compatible with hyper-v also.

Thanks

Nizam

Re: CUCM 10.5 installation issue in microsoft hyper-v

dm — Sun, 15 Dec 2019 23:22:08 GMT

I asked about linux kvm..

Re: CUCM 10.5 installation issue in microsoft hyper-v

Nizam.Ahmed — Mon, 16 Dec 2019 08:26:49 GMT

Hi dm,

Please be informed that Cisco doesn't recommend Linux kvm.

However you can follow the below link but remember I do recommend to use VMware hypervisor or workstation to practice cucm.

https://www.google.com/url?sa=t&source=web&rct=j&url=https://www.vimore.org/watch/pPO75mWN1xw/how-to-install-cucm-10-5-on-linux-kvm-without-vmware//&ved=2ahUKEwilq4Hu3LnmAhVhwjgGHbn4CTIQtwIwFnoECAMQAQ&usg=AOvVaw10lujiiQ0oBw4mnt6jtPs4

Hope you find it helpful.

Plz share your feedback if it is ok or not.

Thanks

Nizam

Re: CUCM 10.5 installation issue in microsoft hyper-v

dm — Mon, 16 Dec 2019 09:00:08 GMT

Yes, yes, as I said- cisco can't run linux on linux :-)