topic Changing IP address on a PLM v11 in Unified Communications Infrastructure

Changing IP address on a PLM v11

kevin.vines — Tue, 19 Mar 2019 18:22:30 GMT

There is no PLM specific documentation on changing the IP address on a Prime License Manager server.

What procedure should be used and do licenses need to be rehosted or licensed instances removed and re-added?

Thanks!

Jitender Bhandari — Wed, 20 Jul 2016 15:39:40 GMT

Hi Kevin,

check the link below.

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/plm/11_0_1/userguide/CPLM_BK_U2C0C808_00_user-guide-rel-1101/installation_1101.html

Hostname

Enter a hostname that is unique to your server.

The hostname can comprise up to 32 characters and can contain alphanumeric characters and hyphens. The first character cannot be a hyphen.

Yes, you can change the entry after installation.

set network hostname

Note

Do not change your hostname while any tasks are running.

IP Mask

Enter the IP subnet mask of this machine.

Yes, you can change the entry after installation by using the following CLI command:

set network ip eth0

Also keep below in mind.

https://supportforums.cisco.com/discussion/12331101/prime-license-manager-ip-address-change

HTH

kevin.vines — Wed, 20 Jul 2016 15:53:42 GMT

Thanks, Jitender :)

Jitender Bhandari — Wed, 20 Jul 2016 15:55:13 GMT

Happy to help.