! The default startup configuration file for Cisco Configuration Professional (Cisco CP) ! DO NOT modify this file; it is required by Cisco CP as is for factory defaults ! Version 1.0 ! hostname yourname ! logging buffered 51200 warnings ! username cisco privilege 15 secret 0 cisco username cisco privilege 15 one-time secret 0 cisco ! ip dhcp excluded-address 10.10.10.1 ! ip dhcp pool ccp-pool import all network 10.10.10.0 255.255.255.128 default-router 10.10.10.1 lease 0 2 ! no ip domain lookup ip domain-name yourdomain.com ! ! interface Vlan1 description $ETH_LAN$ ip address 10.10.10.1 255.255.255.128 ip tcp adjust-mss 1452 ! ip http server ip http access-class 23 ip http secure-server ip http authentication local ip http timeout-policy idle 60 life 86400 requests 10000 ! access-list 23 permit 10.10.10.0 0.0.0.127 ! banner exec ^ % Password expiration warning. ----------------------------------------------------------------------- Cisco Configuration Professional (Cisco CP) is installed on this device and it provides the default username "cisco" for one-time use. If you have already used the username "cisco" to login to the router and your IOS image supports the "one-time" user option, then this username has already expired. You will not be able to login to the router with this username after you exit this session. It is strongly suggested that you create a new username with a privilege level of 15 using the following command. username privilege 15 secret 0 Replace and with the username and password you want to use. ----------------------------------------------------------------------- ^ banner login ^ ----------------------------------------------------------------------- Cisco Configuration Professional (Cisco CP) is installed on this device. This feature requires the one-time use of the username "cisco" with the password "cisco". These default credentials have a privilege level of 15. YOU MUST USE CISCO CP or the CISCO IOS CLI TO CHANGE THESE PUBLICLY-KNOWN CREDENTIALS Here are the Cisco IOS commands. username privilege 15 secret 0 no username cisco Replace and with the username and password you want to use. IF YOU DO NOT CHANGE THE PUBLICLY-KNOWN CREDENTIALS, YOU WILL NOT BE ABLE TO LOG INTO THE DEVICE AGAIN AFTER YOU HAVE LOGGED OFF. For more information about Cisco CP please follow the instructions in the QUICK START GUIDE for your router or go to http://www.cisco.com/go/ciscocp ----------------------------------------------------------------------- ^ ! no cdp run ! ! line con 0 login local line vty 0 4 access-class 23 in privilege level 15 login local transport input telnet transport input telnet ssh line vty 5 15 access-class 23 in privilege level 15 login local transport input telnet transport input telnet ssh ! ! End of Cisco CP default config file end