I have one CUCM Cluster distributed between two datacenter´s . Some Webex App users on LAN are primarily registered to CUCM-SUB1A in DC-A and register to CUCM-SUB1B in DC-B if DC-A Fails .Others Webex App users are registered primary in DC-B in CUCM-...
Hi need to copy one CUCM Virtual Machine (thick disk ) from one Hyperflex 4.5.2b cluster to another Cluster Managed by the same Vcenter 7.0 So i went to one datastore a copy all the files to the other datastore location. But at destination side w...
Hi,I have installed one hyperflex cluster but by mistake i used duplicated Mac Prefix during installation and so i need to change them. Do i need to reiinstall hyperflex cluster from scratch or how its possible change MAC Pool on UCSM.? Regards,MC
Hi,I have installed one hypeflex cluster 4.0.2 with FI 6454 (Clean Install) and on UCS Manager i noticed that on QoS System Classes all priorities (Platinum,Gold, Silver, Bronze,Best Effort) had MTU set to 9216. In Cisco documentation i saw ...
Hi,I have one CUBE with IOS XE 16.12.5 with one SIP Trunk to PSTN with Redundant links.When primary link goes down only incoming calls from PSTN are failing because CUBE as soon receives INVITE reply with SIP/2.0 488 Not Acceptable Media.I have disc...
Hi @Jonathan Schulenberg , thank you for the inputs!
Just to check if i understood the suggestion is two have one expressway-c and expressway-e cluster per DC. But with one single Voice Service Domain or with two subdomains Voice Services Domain...
Hi Levi Halford,
How do you export/import SpeedDials table? I managed to export/impor speed dials with SQL but didn't appear when i Open attendant console client.
Best Regards,
MC
Hi @RedNectar,
Thank you for your explanation. I'm using this Hyperflex Clusters to deploy Cisco Unified Communications Manager (CUCM) using OVA file available from Cisco. Regarding vSphere Thin provisioning Cisco documentation says that:
HX files...
Hi,I manged to solve adding to mac address pools new mac address block and then deleted old mac-address block.Then i had to reset Mac Address at each Server at VNIC level to force use new MAC-address. Then i bring up hyperflex cluster and it seems OK...