topic Re: Need to assign static IP on umbrella VA 2.4.4 on ESXi in Cloud Security

Need to assign static IP on umbrella VA 2.4.4 on ESXi

Jay Tiwari — Tue, 18 Jun 2019 14:27:36 GMT

Hi Experts,

I have deployed umbrella VA 2.4.4 on ESXi and powered on VA. Just after power on VA goes behind DHCP to pick IP and cu environment doesn't have DHCP. Thus i need to assign static IP just after deployment on OVA, however, i don't see way to assign static IP during initial configuration.

Please let me know if there is way to configure static IP just after OVA deployment.

Thanks & Regards,

Jay

Re: Need to assign static IP on umbrella VA 2.4.4 on ESXi

Niles Pyelshak — Tue, 18 Jun 2019 14:34:39 GMT

Jay,

Typically, the VA will only grab an IP address from DHCP if there is one.

However, you can go into the configuration mode and statically set the IP address for your Virtual Appliances.

Here is how:

https://docs.umbrella.com/deployment-umbrella/docs/5-configuring-the-vas

Please rate helpful responses.

Niles

Re: Need to assign static IP on umbrella VA 2.4.4 on ESXi

Jay Tiwari — Tue, 18 Jun 2019 19:11:06 GMT

thanks Niles, however, this document doesn't say how to change IP address in System setting.

Re: Need to assign static IP on umbrella VA 2.4.4 on ESXi

Jay Tiwari — Tue, 18 Jun 2019 19:11:08 GMT

thanks Niles, however, this document doesn't say how to change IP address in System setting.

Re: Need to assign static IP on umbrella VA 2.4.4 on ESXi

Niles Pyelshak — Tue, 18 Jun 2019 19:39:14 GMT

This is the new 2.4.4 that you stated. My apologies.

Try control+B.

https://support.umbrella.com/hc/en-us/articles/360020755952-Configuration-of-the-Virtual-Appliance-Upcoming-Changes

Please rate helpful post.

/Niles