topic Re: FTD enabling SFP interface in Integrated Security Platform

FTD enabling SFP interface

Alen. — Mon, 26 Sep 2022 14:32:01 GMT

Hello guys.

I'm having problems with my Cisco FTD 2140, at the moment of enabling the interfaces with SFP module.

In the image below can see that when I enable the interface, it sends me that message.

I'm using the interface Ethernet 1/13 with a SFP module.

My appliance is a FTD 2140, version 6.6.5 in HA deployment.

Please, If anyone else had a similar (or the same) issue that Could give me some advice on how to address the issue?

Thanks

Re: FTD enabling SFP interface

yumewang — Tue, 11 Oct 2022 08:52:02 GMT

Hello @Alen.

Based on your screenshot and the problem description, you might be hit with this bug.
Could you please try the workaround and see if it solves the problem?

https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvq01485

-----------------------------------------
You can also learn more about Secure Firewall (formerly known as NGFW) through our live Ask the Experts (ATXs) session. Check out Cisco Network Security ATXs Resources [https://community.cisco.com/t5/security-knowledge-base/cisco-network-security-ask-the-experts-resources/ta-p/4416493] to view the latest schedule for upcoming sessions, as well as the useful references, e.g. online guides, FAQs.
-----------------------------------------

Re: FTD enabling SFP interface

Aref Alsouqi — Tue, 11 Oct 2022 10:14:39 GMT

Are you trying to install a 10G SFP or 1G? 10G SFPs are not supported on the 2100 FTDs. However, if you are trying to install a 1G SFP, could you please share the interface hardware settings for review? Also, you can connect to fxos and show the interfaces details including port channels as follows:

- connect fxos

- scope eth-uplink

- show detail expand

Alternatively, if you only want to list the interfaces that are not part of the port channel then you can do this:

- connect fxos

- scope eth-uplink

- scope fabric a

- show interface expand detail

Re: FTD enabling SFP interface

Peter Koltl — Fri, 09 Dec 2022 15:17:26 GMT

FP 2130 and 2140 does support 10G SFP+ modules.