topic Re: CLI Analyzer does not work with certain IOS-XR platforms in Cisco CLI Analyzer

CLI Analyzer does not work with certain IOS-XR platforms

sreenivasgajula — Wed, 17 Nov 2021 17:01:13 GMT

Hello!

CLI Analyzer runs a few initial show commands when you ssh into a device, however, those sequence of commands cause the program to exit out of NCS540 devices since it's cli hierarchy is a little different from other IOS-XR devices like ASR9k.

I couldn't find a way to change the behavior and not lose the cool stuff that cli analyzer does with outputs from show commands.

Re: CLI Analyzer does not work with certain IOS-XR platforms

jm583q — Wed, 05 Jan 2022 23:27:31 GMT

Have the same problem with ncs540

‌

===========================================================

‌

Determining Device Type, Model, Version, and Serial Number:

‌

===========================================================

‌

Running "show version" ...

‌

Running "admin" ...

‌

Running "show diag chassis" ...

‌

Running "exit" ...

Re: CLI Analyzer does not work with certain IOS-XR platforms

jm583q — Wed, 05 Jan 2022 23:30:35 GMT

I found is possible to use it if you chose in settings "No Cisco device" prompt works fine but no possible to use all CLI options

Re: CLI Analyzer does not work with certain IOS-XR platforms

joshvisk — Tue, 21 Mar 2023 14:51:07 GMT

@jm583q....this was extremely helpful!! Now, I can at least log into the box without the recognition script kicking me out due to the "exit" command. It was driving me crazy!