regarding ir829 iox setup

babelawa@cisco.com — Tue, 04 Jun 2019 09:25:15 GMT

Hi Team,

Some i tried setting up iox setup..

but now i am unable to install and reach cartridges..

sgbu-india-ucs2::/users/babelawa/ioxclient_linux_amd64:153> ioxclient profiles show

Active Profile : sand

Profile Name : sand

Host IP: 11.1.1.102

Host Port: 8443

Auth Keys: cm9vdDpjaXNjbzEyMw==

Auth Token:

Api Prefix: /api/v1/

URL Scheme: https

sgbu-india-ucs2::/users/babelawa/ioxclient_linux_amd64:154>

sgbu-india-ucs2::/users/babelawa/ioxclient_linux_amd64:154> ./ioxclient cartridge list python27_yocto.tar.gz

Currently using profile : sand

Command Name: cartridge-list

Error processing command. Server returned 404

sgbu-india-ucs2::/users/babelawa/ioxclient_linux_amd64:155>

I have testbed where trying to setup iox deployement apps.

I am referring this file:///C:/Users/babelawa/Downloads/IR829%20PaaS%20and%20Container%20Style%20Applications%20Deployment%20Guide.pdf

IR829 PaaS and Container Style Applications Deployment Guide.pdf

But there are some issues related to configs

i am able to setup guest os with dhcp.

Here is details and configs:

IR800#sh iox host list de

IOX Server is running. Process ID: 265

Count of hosts registered: 1

Host registered:

===============

IOX Server Address: FE80::76A2:E6FF:FEFD:7DEC; Port: 22222

Link Local Address of Host: FE80::1FF:FE90:8B05

IPV4 Address of Host: 192.168.1.6

IPV6 Address of Host: fe80::1ff:fe90:8b05

Client Version: 0.4

Session ID: 4

OS Nodename: IR800-GOS-1

Host Hardware Vendor: Cisco Systems, Inc.

Host Hardware Version: 1.0

Host Card Type: not implemented

Host OS Version: 1.0.0.2

OS status: RUNNING

Interface Hardware Vendor: None

Interface Hardware Version: None

Interface Card Type: None

Applications Registered:

=======================

Count of applications registered by this host: 0

IR800#

But i am not able to reach to or ping to guest os from our local server.

IR800#sh run int gigabitEthernet 0

Building configuration...

Current configuration : 70 bytes

interface GigabitEthernet0

ip address 11.1.1.43 255.255.255.0

end

IR800#

IR800#sh run int gi

IR800#sh run int gigabitEthernet 5

Building configuration...

Current configuration : 151 bytes

interface GigabitEthernet5

ip address 192.168.1.1 255.255.255.0

ip nat inside

ip virtual-reassembly in

duplex auto

speed auto

ipv6 enable

end

IR800#

IR800#sh run | s nat

! No destination mac-address configured

ip nat inside

ip nat outside

ip nat inside source list NAT_ACL interface GigabitEthernet0 overload

ip nat inside source static tcp 192.168.1.6 8443 interface GigabitEthernet0 8443

ip nat inside source static tcp 192.168.1.6 22 interface GigabitEthernet0 2222

IR800#

IR800#sh run | s access

ip access-list standard NAT_ACL

permit 192.168.0.0 0.0.255.255

IR800#

IR800#sh run | s route

default-router 192.168.1.1

ip route 0.0.0.0 0.0.0.0 10.78.106.129

ip route 192.168.223.0 255.255.255.0 192.168.1.6

IR800#

IR800#sh run | s default

default-router 192.168.1.1

ip default-gateway 10.78.106.129

IR800#

IR800#~

sgbu-india-ucs2::/users/babelawa/ioxclient_linux_amd64:222>

sgbu-india-ucs2::/users/babelawa/ioxclient_linux_amd64:222> ioxclient profiles show

Active Profile : ir

Profile Name : ir

Host IP: 192.168.1.6

Host Port: 8443

Auth Keys: cm9vdDpjaXNjbzEyMw==

Auth Token:

Api Prefix:

URL Scheme: https

sgbu-india-ucs2::/users/babelawa/ioxclient_linux_amd64:223>

sgbu-india-ucs2::/users/babelawa/ioxclient_linux_amd64:223> ioxclient install cartridge python27_yocto.tar.gz

Currently using profile : ir

Error processing command : Get https://192.168.1.6:8443/api/v1/hosting/tokenservice: dial tcp 192.168.1.6:8443: i/o timeout

sgbu-india-ucs2::/users/babelawa/ioxclient_linux_amd64:224>

Could you please help me here in setting up IOX.

Regards,

Balappa

topic regarding ir829 iox setup in DevNet Sandbox

regarding ir829 iox setup

IR829 PaaS and Container Style Applications Deployment Guide.pdf