topic Re: Third party SIP and Shared Endpoint Lab in DevNet Sandbox

Third party SIP and Shared Endpoint Lab

m-haggstrom — Tue, 04 Jun 2019 17:04:44 GMT

Hi,

In the "Shared Endpoint Lab" I can add a third party SIP phone. But how does I configure the SIP phone? I'm trying to use a "soft" phone called MicroSIP. To begin with, what is the SIP server address?

When I added the SIP phone I used the MAC address of the network adapter for the AnyConnect VPN connection.

Regards,

Magnus

Re: Third party SIP and Shared Endpoint Lab

jokearns1 — Thu, 08 Jan 2015 11:12:34 GMT

Hi Magnus,

The MAC must be the same as what is on the CUCM. Using the Anyconnect Mac should be fine as long as it matches up.

I am not familiar with that type of soft phone. Can you send me the MAC and we check the CUCM?

Joe

Re: Third party SIP and Shared Endpoint Lab

m-haggstrom — Thu, 08 Jan 2015 12:02:35 GMT

Hi Joe,

The MAC is 00-05-9A-3C-7A-00.

Magnus

Re: Third party SIP and Shared Endpoint Lab

jokearns1 — Thu, 08 Jan 2015 12:09:04 GMT

Magnus,

What does that endpoint require when registering i.e. username/password etc? I can see the MAC exists on the CUCM and has a DN. Digest user is tommy******93.

Joe

Re: Third party SIP and Shared Endpoint Lab

m-haggstrom — Thu, 08 Jan 2015 12:26:12 GMT

Here is the settings dialog in my SIP client:

When I try to connect I get the message "Not Found". Yet it seems like the client can reach the server, because if I try to connect when the VPN is down it tries for a while and then I get a timeout message.

// Magnus

Re: Third party SIP and Shared Endpoint Lab

m-haggstrom — Thu, 08 Jan 2015 12:38:00 GMT

Hi again,

I tried to change the Transport field to "TLS" and then it tries to connect for a while but ends up with error message "Service Unavailable".

// Magnus

Re: Third party SIP and Shared Endpoint Lab

jokearns1 — Thu, 08 Jan 2015 12:54:10 GMT

Can you set the domain to "abc.inc" and try logging in again. Looking at you device, the CUCM is saying rejected. They are definitely communicating.

Re: Third party SIP and Shared Endpoint Lab

m-haggstrom — Thu, 08 Jan 2015 13:07:02 GMT

Same error messages.

When not using TLS I get this SIP error:

"404 Not Found - The server has definitive information that the user does not exist at the domain specified in the Request-URI. This status is also returned if the domain in the Request-URI does not match any of the domains handled by the recipient of the request"

When using TLS I get this SIP error:

"503 Service Unavailable - The server is undergoing maintenance or is temporarily overloaded and so cannot process the request. A "Retry-After" header field may specify when the client may reattempt its request."

(Text taken from Wikipedia)