topic Re: Nexus Dashboard Multisite Setup in DevNet Sandbox

Nexus Dashboard Multisite Setup

khan-ammir — Sun, 17 May 2026 20:38:41 GMT

I have created multisite setup and i see router being exchanged and remote sites leafs are populated. I see that i cannot ping from one site to another. I just want to know if this is due to some limitation related to sandbox or something wrong with configuration.

Ive attached configs. Again, my bgp l2vpn configs are established, routes are exchanged and they can be seen cross fabrics but not able to ping.

Re: Nexus Dashboard Multisite Setup

balaji.bandi — Sun, 31 May 2026 06:10:45 GMT

This is not an issue with the sandbox, as far as I know. Check the Route Learned; make sure your border routers are configured as expected.

Post some output here to understand the issue.

some reference :

https://www.cisco.com/c/en/us/products/collateral/switches/nexus-9000-series-switches/whitepaper-c11-742114.html

Re: Nexus Dashboard Multisite Setup

julian.bendix — Sun, 31 May 2026 18:28:51 GMT

Data Plane and Control Plane are separate things 😉

Seems you forgot to attach config and such. From where to where are you pinging?

Re: Nexus Dashboard Multisite Setup

julian.bendix — Sun, 31 May 2026 18:29:15 GMT

Same here ...

Data Plane and Control Plane are separate things 🙂

Seems you forgot to attach config and such. From where to where are you pinging?