"No assigned address" error. Increase timeout value on server side, maybe?

xzeng — Wed, 09 Oct 2019 04:31:33 GMT

Failed to run as root once and after 30mins still not able to recover:

ARCH ~ $ openconnect devnetsandbox-us-sjc.cisco.com:20109
POST https://devnetsandbox-us-sjc.cisco.com:20109/
Connected to 128.107.93.228:20109
SSL negotiation with devnetsandbox-us-sjc.cisco.com
Connected to HTTPS on devnetsandbox-us-sjc.cisco.com
XML POST enabled
GROUP: [Anyconnect-pod9]:Anyconnect-pod9
POST https://devnetsandbox-us-sjc.cisco.com:20109/
XML POST enabled
Username:<xyz>
Password:
POST https://devnetsandbox-us-sjc.cisco.com:20109/
Got CONNECT response: HTTP/1.1 200 OK
CSTP connected. DPD 60, Keepalive 300
Set up UDP failed; using SSL instead
Connected as 192.168.9.1, using SSL, with DTLS disabled
mkdir: cannot create directory â€˜/var/run/vpncâ€™: Permission denied
Failed to bind local tun device (TUNSETIFF): Operation not permitted
To configure local networking, openconnect must be running as root
See http://www.infradead.org/openconnect/nonroot.html for more information
Set up tun device failed
Unknown error; exiting.

ARCH ~ $ sudo openconnect devnetsandbox-us-sjc.cisco.com:20109
[sudo] password for <xyz>:
POST https://devnetsandbox-us-sjc.cisco.com:20109/
Connected to 128.107.93.228:20109
SSL negotiation with devnetsandbox-us-sjc.cisco.com
jConnected to HTTPS on devnetsandbox-us-sjc.cisco.com
XML POST enabled
GROUP: [Anyconnect-pod9]:Anyconnect-pod9
POST https://devnetsandbox-us-sjc.cisco.com:20109/
XML POST enabled
Usernam: <xyz>
Password:
POST https://devnetsandbox-us-sjc.cisco.com:20109/
VPN service unavailable; reason: No assigned address
Creating SSL connection failed

Re: "No assigned address" error. Increase timeout value on server side, maybe?

Sachin Kulkarni — Fri, 18 Oct 2019 09:20:46 GMT

I am facing this issue with last 2 reservation. I have not seen any real solution to this coming out. Can someone help please ?

topic Re: "No assigned address" error. Increase timeout value on server side, maybe? in DevNet Sandbox

"No assigned address" error. Increase timeout value on server side, maybe?

Re: "No assigned address" error. Increase timeout value on server side, maybe?