topic CML Labs keeps logging Me Out in DevNet Sandbox

CML Labs keeps logging Me Out

HenryGee — Wed, 14 Oct 2020 07:01:51 GMT

Im working in a CML lab in Dev Net and I keep getting logged out. I am connected with Any Connect VPN. Please Help!

Re: CML Labs keeps logging Me Out

bigevilbeard — Wed, 14 Oct 2020 09:52:36 GMT

Try the following:

1. Open UWM web page

2. Click VIRL Server - System Configuration

3. Click VIRL Services Tab at the top

4. Scroll down to "Disable serial timeout" and check it (if you hover over it it will mention the 15-minute timeout)

5. Click Apply changes

YOU ARE NOT FINISHED

At this point, it brings you to a screen where you can Enable maintenance mode. Do that, then apply the changes again with the button next to maintenance mode. I cannot recall the sequence of steps from there, but it will make the changes (like 4 of them) in sequence. Once those are done, you can disable the maintenance mode to finish the changes. Failure to complete these additional steps will result in the console timeout remaining at 15 minutes. (Can be confirmed by going back to screen in step 4 above.)

HTH

Re: CML Labs keeps logging Me Out

Martin L — Wed, 14 Oct 2020 19:34:42 GMT

in case you talking about Any Connect VPN itself. If your Internet connection is not an issue; the issue may be on their side (many users, system updates/upgrades); there is nothing you can do, Any Connect should auto reconnect. if not, check your settings.

I had this few times, always reconnected by itself. you can wait or take a break and come back. make sure you extend your lab time

Re: CML Labs keeps logging Me Out

HenryGee — Thu, 15 Oct 2020 07:18:02 GMT

Seems to be working now. Thanks for the feedback guys!