topic Re: unable to log in to anyconnect in DevNet Sandbox

unable to log in to anyconnect

nuzim — Tue, 14 Sep 2021 01:34:32 GMT

keep getting this error, anybody knows what that is:

VPN establishment capability for a remote user is disabled. A VPN connection will not be
established

Re: unable to log in to anyconnect

Kasun Bandara — Tue, 14 Sep 2021 02:58:17 GMT

Hi Nuzim,

this can be configuration change. check below links.

https://blog.expta.com/2020/04/how-to-enable-cisco-anyconnect-vpn.html

https://www.alfredtong.com/cisco/how-to-enable-cisco-anyconnect-vpn-through-remote-desktop/

Please rate and upvote if this helps.

Good luck

Re: unable to log in to anyconnect

nuzim — Thu, 16 Sep 2021 15:08:10 GMT

Hello Kasun,

I do not think this will work for me. The reason why I want to use Cisco's anyConnect is for the purpose of taking advantage of Cisco's Modeling Labs. It is a requirement to have anyConnect installed on the device.

I do not have access to the ASDM. Also, the connection name/IP might change which means that I have to make changes on the cisco anyconnect client every time there is a name/IP change.

thanks

Re: unable to log in to anyconnect

bigevilbeard — Thu, 16 Sep 2021 16:28:46 GMT

@nuzim are you trying to connect the AnyConnect client capability from a remote desktop?

Re: unable to log in to anyconnect

nuzim — Thu, 16 Sep 2021 16:34:23 GMT

yes, I have installed anyConnect on my desktop.

Re: unable to log in to anyconnect

bigevilbeard — Thu, 16 Sep 2021 17:11:08 GMT

@nuzim Go to your virtual machines and edit the Settings.

Under Networking, ensure that you are using Share Networking (NAT)
Under Integration Features, ensure that Enable at startup is NOT checked

Now, if you launch your virtual machine Cisco AnyConnect should connect.