topic Re: Question about the Open NX-OS with Nexus 9K sandbox in DevNet Sandbox https://community.cisco.com/t5/devnet-sandbox/question-about-the-open-nx-os-with-nexus-9k-sandbox/m-p/3476745#M902 <HTML><HEAD></HEAD><BODY><P>Solved by installing httpd in the ToolServer</P></BODY></HTML> Thu, 08 Mar 2018 15:39:06 GMT lmargali 2018-03-08T15:39:06Z Question about the Open NX-OS with Nexus 9K sandbox https://community.cisco.com/t5/devnet-sandbox/question-about-the-open-nx-os-with-nexus-9k-sandbox/m-p/3476744#M901 <HTML><HEAD></HEAD><BODY><P>Hi,</P><P></P><P>ping to the ToolServer works but not curl.</P><P>What configuration has to be applied to allow curl?</P><P></P><P>n9kvswitchfcs# run bash</P><P>bash-4.2$ sudo ip netns exec management curl 10.10.20.20</P><P>curl: (7) Failed to connect to 10.10.20.20 port 80: No route to host</P><P>bash-4.2$ sudo ip netns exec management ping 10.10.20.20</P><P>PING 10.10.20.20 (10.10.20.20) 56(84) bytes of data.</P><P>64 bytes from 10.10.20.20: icmp_req=1 ttl=64 time=0.449 ms</P></BODY></HTML> Tue, 04 Jun 2019 09:37:33 GMT https://community.cisco.com/t5/devnet-sandbox/question-about-the-open-nx-os-with-nexus-9k-sandbox/m-p/3476744#M901 lmargali 2019-06-04T09:37:33Z Re: Question about the Open NX-OS with Nexus 9K sandbox https://community.cisco.com/t5/devnet-sandbox/question-about-the-open-nx-os-with-nexus-9k-sandbox/m-p/3476745#M902 <HTML><HEAD></HEAD><BODY><P>Solved by installing httpd in the ToolServer</P></BODY></HTML> Thu, 08 Mar 2018 15:39:06 GMT https://community.cisco.com/t5/devnet-sandbox/question-about-the-open-nx-os-with-nexus-9k-sandbox/m-p/3476745#M902 lmargali 2018-03-08T15:39:06Z