topic Re: Request Visio Stencil for Catalyst 8300/8500 in Technical Documentation Ideas

Request Visio Stencil for Catalyst 8300/8500

WilliamWhitfield41805 — Mon, 21 Dec 2020 14:28:57 GMT

Greetings,

Requesting stencils for Catalyst 8300 and 8500, or at least the location in case I missed it.

Thanks

Re: Request Visio Stencil for Catalyst 8300/8500

balaji.bandi — Mon, 21 Dec 2020 14:54:10 GMT

this is latest what cisco has : (until anything shared privately not aware of)

https://www.cisco.com/c/en/us/products/visio-stencil-listing.html

Re: Request Visio Stencil for Catalyst 8300/8500

aluby7 — Fri, 11 Jun 2021 14:39:46 GMT

Can we get Cisco Catalyst 8200 Stencils? I'm not sure why there would be 8300 and 8500 but not 8200.

Re: Request Visio Stencil for Catalyst 8300/8500

staswright — Wed, 05 Apr 2023 15:30:48 GMT

The 8200 is in the existing stencil, but I'm guessing it's not correct. 8300 is missing.

Re: Request Visio Stencil for Catalyst 8300/8500

Tobias Heisele — Thu, 10 Aug 2023 11:56:00 GMT

Is there any visio stencil that contains C-NIMs and C-SMs?

Re: Request Visio Stencil for Catalyst 8300/8500

LenderS — Wed, 17 Jan 2024 15:31:24 GMT

Esteemed, bumping this thread as we are in dire need of a stencil for the sixteen-port NIM module for the 8000 series routers.

Part number: C-SM-16P4M2X

Re: Request Visio Stencil for Catalyst 8300/8500

LewJack1980_ — Thu, 27 Jun 2024 01:25:58 GMT

Bumping as I also need the cisco 8300 series stencils which are currently missing as well as the C-SM-16P4M2X service module that can be installed into it

Re: Request Visio Stencil for Catalyst 8300/8500

tcanthonyii — Tue, 16 Jul 2024 15:53:38 GMT

Same as LewJack1980_. I need the 8300 stencils as well. why after so long has this not been provided?

Re: Request Visio Stencil for Catalyst 8300/8500

hemmerling — Mon, 16 Sep 2024 22:12:53 GMT

I see that there are Edge 8300/8500 stencils, and if they weren't in a format from 20 years ago (.vss) I might be able to open them and use them (blocked by security policy because the 20+ year format is less secure).
Can Cisco maybe release them in the newer .vssx or maybe both.

Re: Request Visio Stencil for Catalyst 8300/8500

lburleso — Fri, 21 Mar 2025 19:56:17 GMT

I ran into the same problem and used this free converter: https://products.groupdocs.app/conversion/vss-to-vssx

Seriously, it worked. 🤷‍♂️