topic Thanks Brett!!I'll do that in Technical Documentation Ideas

Recent Visio stencil file updates posted to cisco.com

Brett Newman — Thu, 21 Mar 2019 02:36:26 GMT

I thought it might be helpful to post an announcement of new Visio content that we have added in 2013. The page URL is:

http://www.cisco.com/en/US/products/hw/prod_cat_visios.html

Cisco TelePresence (7 MB)

01/Jan/2013

Switches-Cisco Nexus 1000 (1 MB) New!

17/Apr/2013

Switches-Catalyst 4500 (5 MB)

06/Feb/2013

Security-Cisco ASA 55xx (7 MB)

06/May/2013

Routers-Cisco CRS http://www.cisco.com/en/US/prod/assets/visio/Routers-Cisco_CRS_032511.zip.html (6 MB)
15/Apr/2013

Routers-Cisco ASR 9000 (3 MB)

14/Apr/2013

Routers - Cisco ASR 903 (3 MB)

13/Jan/2013

Regards,

Brett Newman

Cisco Visio Production

Visimation Inc.

www.shapesource.com

Recent Visio stencil file updates posted to cisco.com

stefania.castagnolo — Tue, 14 May 2013 08:33:35 GMT

Hi Brett,

I'm looking for HWIC 16-A logical stencil plus the various power supplies for the Cisco router 2911.

Where can I find these?

I have visited this page: http://www.cisco.com/en/US/partner/products/hw/prod_cat_visios.html

I have downloaded quite a few things but nothing includes what I'm looking for.

Could you please help me with this?

Many Thanks.

Best Regards

Stef

Recent Visio stencil file updates posted to cisco.com

Brett Newman — Wed, 15 May 2013 16:26:25 GMT

Hi Stef,

We have 2911 shapes in the Routers-Cisco 2900 stencil. However, the power supplies are integrated into the chassis front.view... that was not ordered from us as a separate component for a Visio shape to be made. The data sheet http://www.cisco.com/en/US/partner/prod/collateral/routers/ps10537/data_sheet_c78_553896.html does not list separate power supplies either. I'm guessing that the 2911 must be ordred with the desired power supply installed although I'm not an expert on the hardware.

I don't know of a source for the HWIC 16-A logical (topology) symbol. We hvae produced some of Cisco's topology icons but most of our work is for the equipment shapes that are used in rack elevations.

I wish I could be more helpful.

Regards,

Brett Newman

Cisco Visio Production

Visimation Inc.

www.shapesource.com

Recent Visio stencil file updates posted to cisco.com

Adam Klimko — Fri, 09 Aug 2013 22:37:25 GMT

Thanks for the new Telepresence stencils - Is there any chance there will be updated stencils for UC any time soon? It has been a while (almost 10 years, a while) since the last set of phone stencils were released.

Recent Visio stencil file updates posted to cisco.com

Brett Newman — Fri, 16 Aug 2013 20:16:19 GMT

Hi Adam,

After receiving several requests last year, I asked the UC group for authorizatin to update those stencils and they declined at that time. I have just asked again and will post the status here as soon as I receive a response.

Regards,

Brett Newman

Cisco Visio Production

Visimation Inc.

www.shapesource.com

Recent Visio stencil file updates posted to cisco.com

bbuford01 — Sun, 25 Aug 2013 01:58:34 GMT

Brett,

How would I go about getting the below visio stencils?

WS-C3560E-48

WS-C3560G-48TS

Regards,

Bobby B.

IA Security Lead

Prometheus Consulting Group

bobby.buford@prometheuscg.com

Recent Visio stencil file updates posted to cisco.com

bbuford01 — Sun, 25 Aug 2013 02:03:10 GMT

Brett,

Sorry I meant to reply to your post May 7, 2013. I'm looking for the following visio stencils:

WS-C3560E-48

WS-C3560G-48

V/r

Bobby. B.

IA Security Lead

Prometheus Consulting Group

bobby.buford@prometheuscg.com

Recent Visio stencil file updates posted to cisco.com

Brett Newman — Thu, 29 Aug 2013 02:04:44 GMT

Hi Bobby,

I just checked with the product group and they will not be funding the two Visio shapes you listed. I wish I could be more helpful.

Regards,

Brett Newman

Cisco Visio Production

Visimation Inc.

www.shapesource.com

Hi Brett,I'm trying to find

Pedro Morais — Wed, 21 May 2014 15:22:24 GMT

Hi Brett,

I'm trying to find the documentation icon for the ASR9000 (see attached example), however I cannot find it. Can you help finding it?

Thanks,

Pedro

Hi Pedro,My group primarily

Brett Newman — Thu, 22 May 2014 16:34:10 GMT

Hi Pedro,

My group primarily creates the physical device icons although we sometimes create topology icons when a product group requests it of us. There is another group that creates the topology icons in general. I will forward this request to them to see if it exists or needs to be newly developed.

Regards,

Brett Newman

Cisco Visio Production

Visimation Inc.

www.shapesource.com

Hi Pedro,I contacted the

Brett Newman — Tue, 27 May 2014 17:54:15 GMT

Hi Pedro,

I contacted the person responsible for logical icons and she said you can requests a new one by emailing askbrand@cisco.com. That won't be a Visio shape but you can insert the image into your Visio drawing. I hope this helps.

Regards,

Brett Newman
Cisco Visio Production
Visimation Inc.
www.shapesource.com

Thanks Brett!!I'll do that

Pedro Morais — Wed, 28 May 2014 09:37:44 GMT

Thanks Brett!!

I'll do that for sure.

Regards,

Pedro

Hi Brett, Another question,

Pedro Morais — Wed, 28 May 2014 15:50:34 GMT

Hi Brett,

Another question, in physical device drawings, where can I find the "Blank Covers" for the line cards, SIPs, SPAs? Devices are ASR1000, ASR9000 and CRS.

Thanks.

Regards,

Pedro

Hi Pedro,In some cases, we

Brett Newman — Mon, 02 Jun 2014 17:44:56 GMT

Hi Pedro,

In some cases, we make the chassis shapes with blank covers by default and you can snap a module over it. In other cases, the chassis slots are empty and there are blank covers in the stencil. For example, in the ASR1000 there is a SIP40 slot cover as well as RP and RF filler panels. However, admittedly there are not always covers for the slots and that is based on what the product group orders from us.

When you run into a situation where there is no slot cover, I suggest that you create one from a simple Visio rectangle. Set the behavior of the shape to "1D" by doing the following, assuming Visio 2010 or 2013:

Click File > Options > Advanced
Scroll down to General section at the bottom
If "Run in developer mode" is not checked, check it and click OK
This will put a Developer item in your Visio menu
Select your rectangle that you drew at the size of what the module cover should be
In the ribbon, click Behavior
Under "Interaction Style" click "Line (1-dimensional)
Now you can click your blank into the same space as a module.

I hope this is helpful.

Regards,

Brett Newman

Cisco Visio Production

Visimation Inc.

www.shapesource.com

HiI am searching the Visio

mbroger — Fri, 25 Jul 2014 11:30:53 GMT

I am searching the Visio Stencils for the new:

WS-X4748-SFP-E

WS-X4724-SFP-E

WS-X4712-SFP-E

Will be there some Stencils?

Some other Users are also searching them see the link:

https://supportforums.cisco.com/discussion/12221766/ws-x4748-sfp-e-visio-stencil

Kind Regards

Re: HiI am searching the Visio

win0405 — Mon, 07 May 2018 09:52:07 GMT

Hi, are you able to find WS-X4724-SFP-E stencil? i unable to get it.

Thank you.

Re: Recent Visio stencil file updates posted to cisco.com

amadoriale — Tue, 15 Oct 2019 10:41:46 GMT

Great idea, though not upkept...

I don't frankly understand why not making a Module section for all SFPs related devices. As far as I remember they should be buried with some switches, but they are not so easily found - for instance atm I cannot find the 40gbps ones, nor the 10. I might just use the 1gbps for placement purpose, but unfortunately there doesn't seem to be an easy-to-read index either that could be consulted in order to find P/N and where the relative stencil is located.

It should be a little easier - if they are modules that work with specific devices, just include them inside of the package, so one opens that specific device and already can see all the compatible HW.