topic Re: Replace Cisco MDS 9148 with new 9148S in Storage Networking

Replace Cisco MDS 9148 with new 9148S

ncardoso — Wed, 06 Nov 2019 15:50:40 GMT

Hi all,

I need to replace a Cisco MDS 9148 with a new Cisco MDS 9148S. I found the following documentation;

MDS 9000 Chassis Backup, Restoration, and Replacement Configuration Example, which is very good. But I still have a few questions. The Cisco MDS 9148 is running 5.2(8), and that version is not supported on Cisco MDS 9148S. If I copy the running-config from the Cisco MDS 9148 to the new Cisco MDS 9148S that is running a different version (NX-OS 6.x or 8.x) will it cause any issues? Or should I upgrade the Cisco MDS 9148 to the same version as MDS 9148S First? Are there any other points I should be aware of? Any other documentation to look at?

Thank you in advance,

Best Regards,

Re: Replace Cisco MDS 9148 with new 9148S

vkbathala — Wed, 06 May 2020 03:50:06 GMT

ncardoso,

I'm facing the same issue right now (5/5/2020).

Please respond to this post when you get a chance.

Thank you.

Re: Replace Cisco MDS 9148 with new 9148S

ncardoso — Wed, 06 May 2020 11:53:41 GMT

Hi vkbathala,

Just follow the instructions on MDS 9000 Chassis Backup, Restoration, and Replacement Configuration Example, you should be ok.

Thank you