Wrong IOS in my Cisco Aironet 1130G

CSCO11813149 — Tue, 25 Feb 2014 15:48:18 GMT

Hello

I have a problem with my Cisco Aironet 1130G series, last time I try to upgrad the IOS but i put the wrong IOS and then i not be able to access to Flash or delete or write anything in my AP. pls i Need Help.

nv_done: unable to open "flash:/config.txt.new"

nv_done: unable to open "flash:/private-multiple-fs.new"[OK]

NVRAM Verification Failed

Proceed with reload? [confirm]

flash:/env_vars.tmp: No such deviceThe filesystem containing the variables may not be initialized yet.

*Mar 1 00:35:07.247: %SYS-5-RELOAD: Reload requested by console. Reload Reason: Reload Command.Xmodem file system is available.

flashfs[0]: 149 files, 7 directories

flashfs[0]: 0 orphaned files, 0 orphaned directories

flashfs[0]: Total bytes: 15998976

flashfs[0]: Bytes used: 5548544

flashfs[0]: Bytes available: 10450432

flashfs[0]: flashfs fsck took 28 seconds.

Base ethernet MAC Address: 44:d3:ca:e5:6a:84

Initializing ethernet port 0...

Reset ethernet port 0...

Reset done!

link auto-negotiating....

auto-negotiation takes 10000 milli-seconds to complete

ERROR: timeout waiting for auto-negotiation to complete

ERROR: fail to bring ethernet link up

The system has been encountered an error initializing

ethernet port. You may need to check hardware

The system is ignoring the error and continuing boot.

If you interrupt the system boot process, the following

commands will reinitialize ethernet, tftp, and finish

loading the operating system software:

ether_init

tftp_init

boot

Loading "flash:/c1310-k9w7-tar.124-25d.JA2/c1310-k9w7-tar.124-25d.JA2.bin"...flash:/c1310-k9w7-tar.124-25d.JA2/c1310-k9w7-tar.124-25d.JA2.bin: no such file or directory

Error loading "flash:/c1310-k9w7-tar.124-25d.JA2/c1310-k9w7-tar.124-25d.JA2.bin"

Interrupt within 5 seconds to abort boot process.

Loading "flash:/c1310-k9w7-mx.124-25d.JA2/c1310-k9w7-mx.124-25d.JA2"...#########################################################################################################################################################################################################################################################################################################################################################################################################################################################################################

File "flash:/c1310-k9w7-mx.124-25d.JA2/c1310-k9w7-mx.124-25d.JA2" uncompressed and installed, entry point: 0x3000

executing...

Restricted Rights Legend

Use, duplication, or disclosure by the Government is

subject to restrictions as set forth in subparagraph

Rights clause at FAR sec. 52.227-19 and subparagraph

Software clause at DFARS sec. 252.227-7013.

cisco Systems, Inc.

170 West Tasman Drive

San Jose, California 95134-1706

Cisco IOS Software, C1310 Software (C1310-K9W7-M), Version 12.4(25d)JA2, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Compiled Wed 12-Sep-12 00:48 by prod_rel_team

Proceeding with system init

Proceeding to unmask interrupts

Initializing flashfs...

Unable to initialize flash device -- device not found.

...done Initializing flashfs.

flash:/env_vars.tmp: No such deviceThe filesystem containing the variables may not be initialized yet.

Radio0 present A506 7100 E8000000 A0000000 80000000 3

Unable to create Frequency bands, Channel / Max Power information not found

This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to

export@cisco.com.

cisco AIR-AP1131G-E-K9 (PowerPCElvis) processor (revision A0) with 25590K/7168K bytes of memory.

Processor board ID FCZ1534Q0T7

PowerPCElvis CPU at 262Mhz, revision number 0x0950

Last reset from power-on

1 FastEthernet interface

1 802.11 Radio(s)

32K bytes of flash-simulated non-volatile configuration memory.

Base ethernet MAC Address: 44:D3:CA:E5:6A:84

Part Number : 73-11587-03

PCA Assembly Number : 800-30422-02

PCA Revision Number : A0

PCB Serial Number : FOC15311DAM

Top Assembly Part Number : 800-29578-02

Top Assembly Serial Number : FCZ1534Q0T7

Top Revision Number : A0

Product/Model Number : AIR-AP1131G-E-K9

Cisco IOS Software, C1310 Software (C1310-K9W7-M), Version 12.4(25d)JA2, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Compiled Wed 12-Sep-12 00:48 by prod_rel_team

ROM: Bootstrap program is C1310 boot loader

BOOTLDR: C1130 Boot Loader (C1130-BOOT-M) Version 12.3(8)JEA, RELEASE SOFTWARE (fc2)

ap uptime is 10 minutes

System returned to ROM by power-on

System image file is "flash:/c1310-k9w7-mx.124-25d.JA2/c1310-k9w7-mx.124-25d.JA2"