topic Re: External Radius Authentication in Web Security https://community.cisco.com/t5/web-security/external-radius-authentication/m-p/1367498#M1002 <HTML><HEAD></HEAD><BODY><P>From the User Guide:</P><P>"Note — AsyncOS for Web connects to the external server over the M1 interface only."</P><P></P><P>So yes, only on M1 interface.</P></BODY></HTML> Fri, 16 Apr 2010 20:17:33 GMT khoanguy 2010-04-16T20:17:33Z External Radius Authentication https://community.cisco.com/t5/web-security/external-radius-authentication/m-p/1367497#M1001 <P>Has anyone else setup the external radius authentication for their administrators?&nbsp; I am thinking about turning it on to get better accounting of who made specific changes to the appliance and would rather use an existing authentication database.&nbsp; If I read correctly the communication to the radius box only connects over interface M1?</P> Thu, 15 Apr 2010 14:43:20 GMT https://community.cisco.com/t5/web-security/external-radius-authentication/m-p/1367497#M1001 eatnoodle 2010-04-15T14:43:20Z Re: External Radius Authentication https://community.cisco.com/t5/web-security/external-radius-authentication/m-p/1367498#M1002 <HTML><HEAD></HEAD><BODY><P>From the User Guide:</P><P>"Note — AsyncOS for Web connects to the external server over the M1 interface only."</P><P></P><P>So yes, only on M1 interface.</P></BODY></HTML> Fri, 16 Apr 2010 20:17:33 GMT https://community.cisco.com/t5/web-security/external-radius-authentication/m-p/1367498#M1002 khoanguy 2010-04-16T20:17:33Z Re: External Radius Authentication https://community.cisco.com/t5/web-security/external-radius-authentication/m-p/1367499#M1003 <HTML><HEAD></HEAD><BODY><P>I have radius configured, I am unable to get any communication from the applicance to my radius server.&nbsp; Have done packet captures and cannot see any traffic whatsoever leaving the appliance. </P></BODY></HTML> Wed, 21 Apr 2010 16:38:49 GMT https://community.cisco.com/t5/web-security/external-radius-authentication/m-p/1367499#M1003 eatnoodle 2010-04-21T16:38:49Z Re: External Radius Authentication https://community.cisco.com/t5/web-security/external-radius-authentication/m-p/1367500#M1004 <HTML><HEAD></HEAD><BODY><P>There should be data on port 1812 (from wireshark use tcp.port==1812) when login is attempted.&nbsp; If not you might need to file a case with Support.</P></BODY></HTML> Wed, 21 Apr 2010 16:45:50 GMT https://community.cisco.com/t5/web-security/external-radius-authentication/m-p/1367500#M1004 khoanguy 2010-04-21T16:45:50Z