topic Re: Programming an auto-setup MeetMe speeddial in Other Collaboration Subjects

Programming an auto-setup MeetMe speeddial

ckltd7401 — Thu, 14 Mar 2019 01:24:02 GMT

Does anyone know if a way to pre-program a softkey or speeddial to automate the process of setting up a MeetMe conf bridge for a specified DN? So far, I've tried associating the MeetMe pattern DN(s) with an IP phone, but not having any success so far. I'm using UCCM 6.1.

Any ideas would be greatly appreciated. Thx.

Re: Programming an auto-setup MeetMe speeddial

Jaime Valencia — Thu, 28 May 2009 13:23:54 GMT

Unfortunately that's not possible, meet-me requires you to press the meet-me softkey and then dial the DN.

HTH

java

if this helps, please rate

Re: Programming an auto-setup MeetMe speeddial

Pranjol Saikia — Fri, 01 Jul 2011 11:57:06 GMT

Hi,

The above requirement of starting the MeetMe conference through an external phone(PSTN) along with authentication,limit of users per conference and scheduleing feature IS POSSIBLE through an application and we have done it.

Re: Programming an auto-setup MeetMe speeddial

Lamar Demby — Sun, 03 Jul 2011 14:07:42 GMT

Would love to know what application could do this and what I'd need to do to get it!

Programming an auto-setup MeetMe speeddial

subash cobi — Wed, 08 Jan 2014 06:08:11 GMT

Hisaikiapranjol, mind sharing what application you used to get this done.

Programming an auto-setup MeetMe speeddial

Pranjol Saikia — Wed, 08 Jan 2014 06:48:37 GMT

Hi Subash,

The above requirement was fulfilled by developing a custom application "MARS MeetMe Password" for our customers.

https://marketplace.cisco.com/catalog/products/1923