topic Re: CS11503 with AVS 3120 appliance in Application Networking https://community.cisco.com/t5/application-networking/cs11503-with-avs-3120-appliance/m-p/583935#M11050 <HTML><HEAD></HEAD><BODY><P>You can connect the AVS 3120 directly to each of the CSS11503. This setup should work without any issues. You can also use the built-in AVS Availability Manager. </P></BODY></HTML> Mon, 03 Apr 2006 17:21:59 GMT thomas.chen 2006-04-03T17:21:59Z CS11503 with AVS 3120 appliance https://community.cisco.com/t5/application-networking/cs11503-with-avs-3120-appliance/m-p/583934#M11049 <P>Hi, I am looking at deploying a pair of CS11503 (probably in ASR redundancy mode) connected to redundant 6509 data center aggregation switches. I am also considering a pair of AVS 3120 accelerator appliances. Is it best to have each AVS 3120 directly connected to each CSS11503 or to have the AVS devices directly connected to the 6509 switches - maybe as a cluster on their own dedicated VLAN/SUBNET ?</P><P></P><P>According to the AVS User Guide doc'n, I have the option to use the built-in AVS Availability Manager, thus not requiring the load balancer?</P><P></P><P>Thank</P><P>Gilles</P><P></P> Tue, 28 Mar 2006 22:12:42 GMT https://community.cisco.com/t5/application-networking/cs11503-with-avs-3120-appliance/m-p/583934#M11049 grlx 2006-03-28T22:12:42Z Re: CS11503 with AVS 3120 appliance https://community.cisco.com/t5/application-networking/cs11503-with-avs-3120-appliance/m-p/583935#M11050 <HTML><HEAD></HEAD><BODY><P>You can connect the AVS 3120 directly to each of the CSS11503. This setup should work without any issues. You can also use the built-in AVS Availability Manager. </P></BODY></HTML> Mon, 03 Apr 2006 17:21:59 GMT https://community.cisco.com/t5/application-networking/cs11503-with-avs-3120-appliance/m-p/583935#M11050 thomas.chen 2006-04-03T17:21:59Z