topic Re: 11503 and port monitoring in Application Networking https://community.cisco.com/t5/application-networking/11503-and-port-monitoring/m-p/668978#M12693 <HTML><HEAD></HEAD><BODY><P>A SPAN session is the association of a destination port with a source port on the same CSS module. The port that is monitored is called the source SPAN (SSPAN) port. </P><P></P><P>SPAN can monitor the ingress path, the egress path, or both. You can configure only one SSPAN port in a CSS chassis. </P></BODY></HTML> Thu, 15 Mar 2007 20:59:58 GMT Syed Iftekhar Ahmed 2007-03-15T20:59:58Z 11503 and port monitoring https://community.cisco.com/t5/application-networking/11503-and-port-monitoring/m-p/668974#M12689 <P>Does anyone know if you can do port monitoring (I want to use a sniffer on a particular port) on an 11503? If so, anyone know the command? Thanks.</P> Thu, 15 Mar 2007 19:53:36 GMT https://community.cisco.com/t5/application-networking/11503-and-port-monitoring/m-p/668974#M12689 jjoseph01 2007-03-15T19:53:36Z Re: 11503 and port monitoring https://community.cisco.com/t5/application-networking/11503-and-port-monitoring/m-p/668975#M12690 <HTML><HEAD></HEAD><BODY><P>If you are 7.2 and higher code then your answer is below</P><P></P><P><A class="jive-link-custom" href="http://www.cisco.com/en/US/products/hw/contnetw/ps792/products_configuration_guide_chapter09186a008015834c.html#wp1099686" target="_blank">http://www.cisco.com/en/US/products/hw/contnetw/ps792/products_configuration_guide_chapter09186a008015834c.html#wp1099686</A></P><P></P><P>Hope it helps</P><P>Syed Iftekhar Ahmed</P><P></P></BODY></HTML> Thu, 15 Mar 2007 20:02:26 GMT https://community.cisco.com/t5/application-networking/11503-and-port-monitoring/m-p/668975#M12690 Syed Iftekhar Ahmed 2007-03-15T20:02:26Z Re: 11503 and port monitoring https://community.cisco.com/t5/application-networking/11503-and-port-monitoring/m-p/668976#M12691 <HTML><HEAD></HEAD><BODY><P>Sure you can. Use the setspan command. </P><P><A class="jive-link-custom" href="http://www.cisco.com/univercd/cc/td/doc/product/webscale/css/css_810/cmdrefgd/cmdglobl.htm#wp1299043" target="_blank">http://www.cisco.com/univercd/cc/td/doc/product/webscale/css/css_810/cmdrefgd/cmdglobl.htm#wp1299043</A></P><P></P><P>Cheers. </P><P></P><P>-Alejandro. </P></BODY></HTML> Thu, 15 Mar 2007 20:06:21 GMT https://community.cisco.com/t5/application-networking/11503-and-port-monitoring/m-p/668976#M12691 alejrodr 2007-03-15T20:06:21Z Re: 11503 and port monitoring https://community.cisco.com/t5/application-networking/11503-and-port-monitoring/m-p/668977#M12692 <HTML><HEAD></HEAD><BODY><P>Can you monitor more than one port to one destination port? Like ports 1, 2 and 3 to port number 4?</P></BODY></HTML> Thu, 15 Mar 2007 20:51:39 GMT https://community.cisco.com/t5/application-networking/11503-and-port-monitoring/m-p/668977#M12692 jjoseph01 2007-03-15T20:51:39Z Re: 11503 and port monitoring https://community.cisco.com/t5/application-networking/11503-and-port-monitoring/m-p/668978#M12693 <HTML><HEAD></HEAD><BODY><P>A SPAN session is the association of a destination port with a source port on the same CSS module. The port that is monitored is called the source SPAN (SSPAN) port. </P><P></P><P>SPAN can monitor the ingress path, the egress path, or both. You can configure only one SSPAN port in a CSS chassis. </P></BODY></HTML> Thu, 15 Mar 2007 20:59:58 GMT https://community.cisco.com/t5/application-networking/11503-and-port-monitoring/m-p/668978#M12693 Syed Iftekhar Ahmed 2007-03-15T20:59:58Z