topic SIP Probe for ACE in Application Networking https://community.cisco.com/t5/application-networking/sip-probe-for-ace/m-p/714957#M13604 <P>Does anyone have a good health check for SIP?</P> Thu, 22 Mar 2007 20:25:45 GMT codycook70 2007-03-22T20:25:45Z SIP Probe for ACE https://community.cisco.com/t5/application-networking/sip-probe-for-ace/m-p/714957#M13604 <P>Does anyone have a good health check for SIP?</P> Thu, 22 Mar 2007 20:25:45 GMT https://community.cisco.com/t5/application-networking/sip-probe-for-ace/m-p/714957#M13604 codycook70 2007-03-22T20:25:45Z Re: SIP Probe for ACE https://community.cisco.com/t5/application-networking/sip-probe-for-ace/m-p/714958#M13605 <HTML><HEAD></HEAD><BODY><P>Currently ACE is not SIP aware.</P><P></P><P>ACE will support SIP with version 2.0. It will support SIP load-balancing over TCP and UDP, it can load-balance based upon the SIP header i.e. can load balance based upon the Call-ID (even though information for many calls are in the same TCP connection). It</P><P>can also do stickiness based upon Call-ID.</P><P>Additionally, ACE 2.0 supports SIP probes.</P><P></P><P>Currently you can only use udp probes</P><P></P><P>probe UDP5060 udp</P><P> interval 1</P><P> faildetect 2</P><P> passdetect interval 60</P><P> passdetect count 2</P><P> port 5060</P><P>!</P><P>probe ICMP icmp</P><P> interval 1</P><P> faildetect 2</P><P> passdetect interval 60</P><P> passdetect count 2</P><P>!</P><P>!</P><P>serverfarm SIP</P><P> rserver 192.160.246.147</P><P> inservice</P><P> rserver 192.160.246.148</P><P> inservice</P><P> probe ICMP</P><P> probe UDP5060</P><P></P><P></P><P>Syed Iftekhar Ahmed</P></BODY></HTML> Thu, 22 Mar 2007 21:30:51 GMT https://community.cisco.com/t5/application-networking/sip-probe-for-ace/m-p/714958#M13605 Syed Iftekhar Ahmed 2007-03-22T21:30:51Z