topic Re: Cisco CSS running version 5.02 Build 3, flow-state, SNMP? in Application Networking https://community.cisco.com/t5/application-networking/cisco-css-running-version-5-02-build-3-flow-state-snmp/m-p/895013#M17552 <HTML><HEAD></HEAD><BODY><P>your version is not suported anymore.</P><P>You should seriouslt consider an upgrade to 6.10</P><P></P><P>Gilles.</P></BODY></HTML> Fri, 30 Nov 2007 20:45:56 GMT Gilles Dufour 2007-11-30T20:45:56Z Cisco CSS running version 5.02 Build 3, flow-state, SNMP? https://community.cisco.com/t5/application-networking/cisco-css-running-version-5-02-build-3-flow-state-snmp/m-p/895012#M17551 <P>Trying to figure out how to configure SNMP access to servers located behind a CSS running v5.02003.</P><P></P><P>It looks like in v6+ flow-state flow-enable needs to be configured, but in v5, I don't see this command.</P><P></P><P>Does anyone know if the command isn't required because in v5 the CSS already builds flow information for UDP 161, or if it isn't possible in this version of code?</P> Tue, 27 Nov 2007 17:46:07 GMT https://community.cisco.com/t5/application-networking/cisco-css-running-version-5-02-build-3-flow-state-snmp/m-p/895012#M17551 adrian_chung 2007-11-27T17:46:07Z Re: Cisco CSS running version 5.02 Build 3, flow-state, SNMP? https://community.cisco.com/t5/application-networking/cisco-css-running-version-5-02-build-3-flow-state-snmp/m-p/895013#M17552 <HTML><HEAD></HEAD><BODY><P>your version is not suported anymore.</P><P>You should seriouslt consider an upgrade to 6.10</P><P></P><P>Gilles.</P></BODY></HTML> Fri, 30 Nov 2007 20:45:56 GMT https://community.cisco.com/t5/application-networking/cisco-css-running-version-5-02-build-3-flow-state-snmp/m-p/895013#M17552 Gilles Dufour 2007-11-30T20:45:56Z