topic Re: change the destination port CSS in Application Networking https://community.cisco.com/t5/application-networking/change-the-destination-port-css/m-p/901726#M17693 <HTML><HEAD></HEAD><BODY><P>The 2 questions you are asking are the same:</P><P></P><P>The Port on the content rule is how traffic enters the box (incomming request port)</P><P>The Port on the service is how traffic will be sent to the server.</P><P></P><P>By using diffrent ports on the service and content rule you invoke port address translation wich you need for question 2</P></BODY></HTML> Fri, 21 Sep 2007 08:46:08 GMT diro 2007-09-21T08:46:08Z change the destination port CSS https://community.cisco.com/t5/application-networking/change-the-destination-port-css/m-p/901724#M17691 <P>Guys,</P><P></P><P>few questions please regarding for CSS as i'm not expert on this field:</P><P></P><P>1-what is the differnce between port configured under service and under content rules ? are they have to be the same port number ?</P><P>2-if incoming request came to the CSS through VIP with the default port 80.. how i can change the port to 9080 with the same url and send it to the real IP of the server ?</P><P></P> Thu, 20 Sep 2007 22:32:26 GMT https://community.cisco.com/t5/application-networking/change-the-destination-port-css/m-p/901724#M17691 hassan_oudeh 2007-09-20T22:32:26Z Re: change the destination port CSS https://community.cisco.com/t5/application-networking/change-the-destination-port-css/m-p/901725#M17692 <HTML><HEAD></HEAD><BODY><P>one more thing..</P><P></P><P>is the mode of the CSS (box to box And One armed) makes any differnet in the behaviour of the traffic and requests ? </P><P>what is the use of the group ?</P><P></P><P>Thanks,</P><P>Hasan</P></BODY></HTML> Thu, 20 Sep 2007 22:35:52 GMT https://community.cisco.com/t5/application-networking/change-the-destination-port-css/m-p/901725#M17692 hassan_oudeh 2007-09-20T22:35:52Z Re: change the destination port CSS https://community.cisco.com/t5/application-networking/change-the-destination-port-css/m-p/901726#M17693 <HTML><HEAD></HEAD><BODY><P>The 2 questions you are asking are the same:</P><P></P><P>The Port on the content rule is how traffic enters the box (incomming request port)</P><P>The Port on the service is how traffic will be sent to the server.</P><P></P><P>By using diffrent ports on the service and content rule you invoke port address translation wich you need for question 2</P></BODY></HTML> Fri, 21 Sep 2007 08:46:08 GMT https://community.cisco.com/t5/application-networking/change-the-destination-port-css/m-p/901726#M17693 diro 2007-09-21T08:46:08Z Re: change the destination port CSS https://community.cisco.com/t5/application-networking/change-the-destination-port-css/m-p/901727#M17694 <HTML><HEAD></HEAD><BODY><P>groups are used for source address translations.</P><P></P><P>box to box is a redundancy setup, One Armed is a design, so you can not compare these</P><P></P><P>Redundany:</P><P>-Vip</P><P>-Box2Box</P><P></P><P>Design:</P><P>-One Armed</P><P>-Routed mode</P><P>-Bridged mode</P><P></P></BODY></HTML> Fri, 21 Sep 2007 08:48:43 GMT https://community.cisco.com/t5/application-networking/change-the-destination-port-css/m-p/901727#M17694 diro 2007-09-21T08:48:43Z Re: change the destination port CSS https://community.cisco.com/t5/application-networking/change-the-destination-port-css/m-p/901728#M17695 <HTML><HEAD></HEAD><BODY><P>is there any way how i can translate with the port number ?</P><P>i mean force the incoming request to be redirectes to the server on specific port only ?</P><P></P></BODY></HTML> Fri, 21 Sep 2007 08:58:06 GMT https://community.cisco.com/t5/application-networking/change-the-destination-port-css/m-p/901728#M17695 hassan_oudeh 2007-09-21T08:58:06Z