topic Re: Routing on Cisco CSS in Application Networking https://community.cisco.com/t5/application-networking/routing-on-cisco-css/m-p/1095419#M22243 <HTML><HEAD></HEAD><BODY><P>Hi,</P><P></P><P>I assume static routes for these 2 subnets are configured on you FW pointing to the VRRP of the CSSes?</P><P></P><P>Why do you use bypass instead of permit?</P></BODY></HTML> Tue, 04 Nov 2008 09:14:50 GMT dario.didio 2008-11-04T09:14:50Z Routing on Cisco CSS https://community.cisco.com/t5/application-networking/routing-on-cisco-css/m-p/1095417#M22241 <P>Hi Friends,</P><P></P><P>I am facing some issues with routing on Cisco CSS. My requirement is that i want to make internal subnets accessible from external network(firewall). </P><P>Please have a look at the diagram, i want to reach 10.87.12.0/24 and 10.87.16.0/24 subnet reachable from firewall. CSS is configured in routed mode.</P><P></P><P>Thanks,</P><P>Sarab</P><P></P><P> </P><P></P> Mon, 03 Nov 2008 14:18:00 GMT https://community.cisco.com/t5/application-networking/routing-on-cisco-css/m-p/1095417#M22241 sarabjitmatharu 2008-11-03T14:18:00Z Re: Routing on Cisco CSS https://community.cisco.com/t5/application-networking/routing-on-cisco-css/m-p/1095418#M22242 <HTML><HEAD></HEAD><BODY><P>Sorry, by mistake i posted this twice.</P></BODY></HTML> Mon, 03 Nov 2008 14:23:27 GMT https://community.cisco.com/t5/application-networking/routing-on-cisco-css/m-p/1095418#M22242 sarabjitmatharu 2008-11-03T14:23:27Z Re: Routing on Cisco CSS https://community.cisco.com/t5/application-networking/routing-on-cisco-css/m-p/1095419#M22243 <HTML><HEAD></HEAD><BODY><P>Hi,</P><P></P><P>I assume static routes for these 2 subnets are configured on you FW pointing to the VRRP of the CSSes?</P><P></P><P>Why do you use bypass instead of permit?</P></BODY></HTML> Tue, 04 Nov 2008 09:14:50 GMT https://community.cisco.com/t5/application-networking/routing-on-cisco-css/m-p/1095419#M22243 dario.didio 2008-11-04T09:14:50Z Re: Routing on Cisco CSS https://community.cisco.com/t5/application-networking/routing-on-cisco-css/m-p/1095420#M22244 <HTML><HEAD></HEAD><BODY><P>Hi Dario,</P><P></P><P>Static routes are present on firewall. And for bypass i was not aware of commands, it is not working even if i disable Acls of CSS.</P></BODY></HTML> Tue, 04 Nov 2008 13:16:52 GMT https://community.cisco.com/t5/application-networking/routing-on-cisco-css/m-p/1095420#M22244 sarabjitmatharu 2008-11-04T13:16:52Z