topic Re: Copying ACS Module (ACE20) Context Configs in Application Networking

Copying ACS Module (ACE20) Context Configs

jason.williams — Tue, 08 Sep 2009 14:30:02 GMT

Is there anyway to pull all of the context configures in one shot? Can I copy them from the Admin context or do I have to changeto each context and do a copy run?

Thanks.

Re: Copying ACS Module (ACE20) Context Configs

Collin Clark — Tue, 08 Sep 2009 20:13:43 GMT

You can view other contexts running ocnfig from the admin-

invoke context context_name show running-config

You may be able to CLI something with |. Her's a link for you.

http://www.cisco.com/en/US/docs/app_ntwk_services/data_center_app_services/ace_appliances/vA3_1_0/configuration/admin/guide/managesw.html#wp1143730

Hope it helps.

Re: Copying ACS Module (ACE20) Context Configs

dirttrackfvr — Tue, 08 Sep 2009 22:36:52 GMT

I am trying to just begin the configuration process of the GSS, my SC knows about as much as me.. I sure could use some assistance! Thanks

Re: Copying ACS Module (ACE20) Context Configs

cstockwe — Wed, 09 Sep 2009 04:31:39 GMT

Guys,

I just paste a set of commands from the admin context which manually copy the running configs to a tftp server...once each context is done it moves to the next.

It is a quick and nasty way of making sure all your contexts are backed up.

Like this:

ace01/admin# changeto context1

ace01/context1# copy running-config tftp://10.1.1.1/context1.rtf

ace01/admin# changeto context2

ace01/context2# copy running-config tftp://10.1.1.1/context2.rtf

ace01/admin# changeto context3

ace01/context3# copy running-config tftp://10.1.1.1/context3.rtf

...and so on for all the contexts you have.

Re: Copying ACS Module (ACE20) Context Configs

jason.williams — Wed, 09 Sep 2009 11:32:33 GMT

My problem with this is that it seems that only that admin context can reach my PC, and that's only over sftp. The other contexts are blocked by a firewall, that's why I was trying to find a way to copy the configs from the admin context.

Re: Copying ACS Module (ACE20) Context Configs

Gilles Dufour — Wed, 09 Sep 2009 11:53:48 GMT

Each context should have its own management access as they must be managed separately.

This is the idea behind virtualization...

So, fix the firewall and have a minimum config in order to access the context directly.

ACE does not have a mechanism to copy information from one context to the other for security reason.