HSE support CSS WebNS 7.20 Build 109 ???

sthon-dbsys — Thu, 26 Feb 2004 14:40:46 GMT

Hi together,

at http://www.cisco.com/univercd/cc/td/doc/product/rtrmgmt/chse/1105/1_7_1/hse_sdt.htm

I cannot find, that HSE 1.7.1 support WebNS 7.20 Build 109

I only find support for 7.10 build 102.

Is this correct ?

I have some problems, that the HSE did not show the correct service status at "Hosting -> Activation -> <device> -> <owner> -> <content rule> -> service".

eg service is "suspend" HSE show me "active".

I cleared my browser cache and push the refresh button several times.

If I mark the service and press "Status" I get the correct status and correct colour on the screen,

If I push "refresh" again, the view show me a green colour for the service, what is definitely wrong.

So another question is, where does the HSE stores the infos about the CSS status:

- If I mark a service and press "Status" all look fine. It seems that the HSE send a snmp request

- If I push the refresh button, service is displaey wrong. Does the HSE use an internal database to build up this view ?

thanks in advance

sascha

Re: HSE support CSS WebNS 7.20 Build 109 ???

keyushah — Mon, 01 Mar 2004 19:03:37 GMT

Hi Sascha,

Please see here for the supported devices list for HSE 1.7.3.

http://www.cisco.com/univercd/cc/td/doc/product/rtrmgmt/chse/1105/1_7_3/hse_sdt.htm#9983

It does _NOT_ support WebNS 7.20 yet.

for your detailed troubleshooting questions, please open a TAC case.

topic Re: HSE support CSS WebNS 7.20 Build 109 ??? in Application Networking

HSE support CSS WebNS 7.20 Build 109 ???

Re: HSE support CSS WebNS 7.20 Build 109 ???