topic SLB Application Processor Complex in Application Networking

SLB Application Processor Complex

mjgoodman — Fri, 18 Jun 2010 09:57:04 GMT

I have a WS-X6066-SLB-APC module in my 6500. I have a 2nd one in another 6500 and need to replicate these. I understand there are some commands to get this working and I'm told some of this is automated. Can anyone point me to links on procedures to enable this?

regards,

mike

Re: SLB Application Processor Complex

litrenta — Tue, 22 Jun 2010 14:07:44 GMT

If you are configuring the second CSM to be part of a redundant pair

you configure config sync , instructions for this are at:

http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/csm/4.2.x/configuration/guide/redun.html

You need 4.2 code on CSM and min of 12.2(18)SXF6 on cat.