topic Re: Configuring ACE to loadbalance 4 transparent firewalls in Application Networking

Configuring ACE to loadbalance 4 transparent firewalls

zivweinrich — Wed, 05 May 2010 13:44:15 GMT

Hi,

Is someone ever try to configure cisco ACE to loadbalance between 4 transparent FWs?

I will be happy to consult about this type of configuration.

Thank,

Ziv.

Re: Configuring ACE to loadbalance 4 transparent firewalls

Sean Merrow — Wed, 05 May 2010 16:41:29 GMT

Hello Ziv,

The Configuring Firewall Load Balancing section of the ACE config guides would be a good place to get you started. You should refer specifically to the configuration steps and config examples for Stealth FWLB. You can also find FWLB examples on the doc wiki.

Hope this helps,

Sean

Re: Configuring ACE to loadbalance 4 transparent firewalls

zivweinrich — Fri, 07 May 2010 05:27:44 GMT

Hi,

Thanks for your reply,

I saw this example, but i have a different issue,

I need to loadbalance all traffic (protocols) coming from outside to inside the network (In the inside network I have many servers located in a diffrenet Vlans and I can't configured them as part of a server farm).

Any idea how can i configure it?

Thanks.

Re: Configuring ACE to loadbalance 4 transparent firewalls

Sean Merrow — Fri, 07 May 2010 12:37:51 GMT

Hi Ziv,

I'm not sure I understand your scenario. If you want to load balance to one or more servers, they need to be configured as rservers and added to a serverfarm.

Sean