topic Re: Load Balancing remote server in CSS11800 in Application Networking https://community.cisco.com/t5/application-networking/load-balancing-remote-server-in-css11800/m-p/237621#M3375 <HTML><HEAD></HEAD><BODY><P>This configuration looks fine. Check if there are any known issues.</P></BODY></HTML> Mon, 19 Jul 2004 13:50:03 GMT sbilgi 2004-07-19T13:50:03Z Load Balancing remote server in CSS11800 https://community.cisco.com/t5/application-networking/load-balancing-remote-server-in-css11800/m-p/237620#M3374 <P>I configure to loadbalance remote server.</P><P></P><P>----------------Network Diagram-----------------</P><P>user-SW--CSS11800---CoreSW----BBSW----server1</P><P>.......................................................................|-----server2</P><P>------------------------------------------------</P><P>configuration CSS11800</P><P></P><P>service server1</P><P> ip address 192.168.10.1</P><P> active</P><P></P><P>service server2</P><P> ip address 192.168.10.2</P><P> active</P><P></P><P>owner Vserver</P><P> content L3_rule</P><P> vip address 192.168.100.100</P><P> add service server1</P><P> add service server2</P><P> active</P><P></P><P>group out-bound-NAT-vserver</P><P> vip address 192.168.100.100</P><P> add service server1</P><P> add service server2</P><P> active</P><P>--------------------------------</P><P></P><P></P><P>User can connect server1 with telnet.</P><P>User can connect server2 with telnet.</P><P>User can't connect Vserser(192.168.100.100) witch telnet.</P><P>Ping is successful to Vserver from user.</P><P></P><P>why can't connect to Vserver?</P><P></P><P>Any configuration is need remote server loadbalance?</P><P></P> Tue, 13 Jul 2004 07:29:50 GMT https://community.cisco.com/t5/application-networking/load-balancing-remote-server-in-css11800/m-p/237620#M3374 drazik 2004-07-13T07:29:50Z Re: Load Balancing remote server in CSS11800 https://community.cisco.com/t5/application-networking/load-balancing-remote-server-in-css11800/m-p/237621#M3375 <HTML><HEAD></HEAD><BODY><P>This configuration looks fine. Check if there are any known issues.</P></BODY></HTML> Mon, 19 Jul 2004 13:50:03 GMT https://community.cisco.com/t5/application-networking/load-balancing-remote-server-in-css11800/m-p/237621#M3375 sbilgi 2004-07-19T13:50:03Z Re: Load Balancing remote server in CSS11800 https://community.cisco.com/t5/application-networking/load-balancing-remote-server-in-css11800/m-p/237622#M3376 <HTML><HEAD></HEAD><BODY><P>Hey,</P><P></P><P>Can you paste the full config.. Is there any acl ?</P><P></P><P>Regards,</P><P>Sagar</P></BODY></HTML> Mon, 19 Jul 2004 18:51:57 GMT https://community.cisco.com/t5/application-networking/load-balancing-remote-server-in-css11800/m-p/237622#M3376 sagdas 2004-07-19T18:51:57Z Re: Load Balancing remote server in CSS11800 https://community.cisco.com/t5/application-networking/load-balancing-remote-server-in-css11800/m-p/237623#M3377 <HTML><HEAD></HEAD><BODY><P>I have solved this problem.</P><P></P><P>But need configuration about "add destination service server#" ,not "add service server#" in CSS11800.</P><P></P><P>group out-bound-NAT-vserver </P><P>vip address 192.168.100.100 </P><P>add destination service server1 </P><P>add destination service server2 </P><P>active </P></BODY></HTML> Thu, 22 Jul 2004 08:23:20 GMT https://community.cisco.com/t5/application-networking/load-balancing-remote-server-in-css11800/m-p/237623#M3377 drazik 2004-07-22T08:23:20Z Re: Load Balancing remote server in CSS11800 https://community.cisco.com/t5/application-networking/load-balancing-remote-server-in-css11800/m-p/237624#M3378 <HTML><HEAD></HEAD><BODY><P>Hey,</P><P></P><P>Good to hear this.. So the issue was asymetric routing. The add destination service is used to NAT the soure ip in the packets which come to the vip and are destined to the servers. The CSS changes the source ip to the ip of the VIP (which is specified in the group). For the server, the client's ip is the ip of the CSS and it replies back to the CSS and not directly to the original client.</P><P></P><P>Here is a link which you can go through.. <span class="lia-unicode-emoji" title=":slightly_smiling_face:">🙂</span></P><P></P><P></P><P><A class="jive-link-custom" href="http://www.cisco.com/en/US/partner/products/hw/contnetw/ps789/products_configuration_example09186a0080093dff.shtml" target="_blank">http://www.cisco.com/en/US/partner/products/hw/contnetw/ps789/products_configuration_example09186a0080093dff.shtml</A></P><P></P><P></P><P>Cheers!!!</P><P>Sagar</P><P></P><P></P><P></P></BODY></HTML> Thu, 22 Jul 2004 10:22:15 GMT https://community.cisco.com/t5/application-networking/load-balancing-remote-server-in-css11800/m-p/237624#M3378 sagdas 2004-07-22T10:22:15Z