topic Re: ACE SNMP source interface for context. in Application Networking

ACE SNMP source interface for context.

omarmontes — Tue, 03 May 2011 00:45:38 GMT

Hi guys.. one question:

I know that SNMP packets from the AC are sourced from the interface that is usead to reach the SNMP Server (an ANM for example). The thing I'm not sure about is, when having multiple contexts, do SNMP packets get out for every context? or just from the Admin context?

I'm asking this because if there is SNMP traffic to and from every context, then I need to use public IP address in every context.

Any help?

thanks!

Re: ACE SNMP source interface for context.

amacuz — Tue, 03 May 2011 07:07:21 GMT

Hi Omar,

I'm not aware of such feature on the ACE, however you can do SNMP queries related to other contexts (for specific information) via the Admin one, at least in A4(1.0) and above.

Please see:

http://www.cisco.com/en/US/docs/app_ntwk_services/data_center_app_services/ace_appliances/vA4_1_0/configuration/administration/guide/snmp.html#wp1095618

Alessandro

If this helps you and/or answers your question please mark the question as "answered" and/or rate it, so other users can easily find it.

Re: ACE SNMP source interface for context.

omarmontes — Thu, 05 May 2011 16:00:49 GMT

Oh I see.

Do you know if the ANM does this? Getting all the info directly from the Admin context?

Re: ACE SNMP source interface for context.

amacuz — Thu, 05 May 2011 17:13:43 GMT

Hi Omar,

yes it does.

Alessandro

If this helps you and/or answers your question please mark the question as "answered" and/or rate it, so other users can easily find it.