topic ACE rate limiting per source in Application Networking https://community.cisco.com/t5/application-networking/ace-rate-limiting-per-source/m-p/1689193#M33983 <P>Hi, is there a way to configure ACE to perform rate liimting per source address? Say if a source sends more than 100 connections per second, I want ACE to drop further connections from this perticular source only.</P><P></P><P>thanks. </P> Mon, 04 Jul 2011 16:01:11 GMT zhenningx 2011-07-04T16:01:11Z ACE rate limiting per source https://community.cisco.com/t5/application-networking/ace-rate-limiting-per-source/m-p/1689193#M33983 <P>Hi, is there a way to configure ACE to perform rate liimting per source address? Say if a source sends more than 100 connections per second, I want ACE to drop further connections from this perticular source only.</P><P></P><P>thanks. </P> Mon, 04 Jul 2011 16:01:11 GMT https://community.cisco.com/t5/application-networking/ace-rate-limiting-per-source/m-p/1689193#M33983 zhenningx 2011-07-04T16:01:11Z ACE rate limiting per source https://community.cisco.com/t5/application-networking/ace-rate-limiting-per-source/m-p/1689194#M33984 <HTML><HEAD></HEAD><BODY><P>Hi,</P><P></P><P>Unfortunately this is not possible on the ACE module at the moment.</P><P>You might be able to achieve something similar though by using the UBRL feature on the catalyst itself: </P><P><A class="jive-link-external-small" href="http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps708/prod_white_paper0900aecd803e5017.html">http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps708/prod_white_paper0900aecd803e5017.html</A></P><P></P><P>Regards,</P><P>Nicolas</P></BODY></HTML> Thu, 07 Jul 2011 09:47:01 GMT https://community.cisco.com/t5/application-networking/ace-rate-limiting-per-source/m-p/1689194#M33984 Nicolas Fournier 2011-07-07T09:47:01Z