Command to remove the preempt option

y.lo — Tue, 26 Apr 2011 09:11:31 GMT

Is there a single command to remove the preempt option in the configuration, or other way to remove it without service interruption?

ip virtual-router 1 priority 110 preempt

I don't want to use the 'no' form to remove the whole command and add it back, which should cause service interruption.

Many thanks.

Re: Command to remove the preempt option

yushimaz — Wed, 27 Apr 2011 02:23:48 GMT

How about 'ip virtual-router 1 priority 110' command?

When I checked the command with below basic config,

'ip virtual-router' configuration is overwritten.

I don't know the impact of production traffic since I don't send any traffic.

So, I suggest to configure it after office hours.

CSS11503-A(config-circuit-ip[VLAN774-192.168.74.200])# show run cir

!************************** CIRCUIT **************************

circuit VLAN774

ip address 192.168.74.200 255.255.255.0

ip virtual-router 1 priority 110 preempt <<==

CSS11503-A(config-circuit-ip[VLAN774-192.168.74.200])# ip virtual-router 1 priority 110 <<==

CSS11503-A(config-circuit-ip[VLAN774-192.168.74.200])# show run cir

!************************** CIRCUIT **************************

circuit VLAN774

ip address 192.168.74.200 255.255.255.0

ip virtual-router 1 priority 110 <<==

Regards,

Yuji