Receiving error when applying new policy-map/class-map

Jeff Bull — Wed, 12 Oct 2011 17:52:44 GMT

I've built out a new VIP on one of my ACE contexts, but each time I try to apply either the policy-map to an interface, or the class-map to the policy-map, receive the same error:

Error: Cannot overlap vip or NAT or interface address configured in a shared interface

The odd part is there isn't a conflicting IP address anywhere on the context that I can find. Have a TAC case open, but my assigned engineer wasn't able to find a conflict either. Anyone have any thoughts on this?

Here are the pertinent configurations (name's/IP's have been changed from actual):

probe http PROBE

port 80

interval 5

faildetect 12

passdetect interval 5

passdetect count 15

request method get url /server

expect status 200 200

header Host header-value "www.prd.com"

connection term forced

open 1

rserver host SERVER01

ip address 10.24.71.16

inservice

rserver host SERVER02

ip address 10.24.71.17

inservice

serverfarm host PRD_SF

predictor leastconns

probe PROBE

rserver SERVER01

inservice

rserver SERVER02

inservice

parameter-map type http HTTP_PARAMS

case-insensitive

persistence-rebalance

set header-maxparse-length 8192

length-exceed continue

parameter-map type connection CONN_PARAMS

set tcp mss min 536 max 1380

exceed-mss allow

sticky ip-netmask 255.255.255.0 address source PRD_SG

timeout 60

replicate sticky

serverfarm PRD_SF

class-map match-all PRD_VIP

2 match virtual-address 10.24.70.171 tcp eq www

class-map match-all PRD_HTTPS_VIP

2 match virtual-address 10.24.70.171 tcp eq https

policy-map type loadbalance first-match PRD_LB-PMAP

class class-default

sticky-serverfarm PRD_SG

policy-map multi-match PRD_PMAP

class PRD_VIP

loadbalance vip inservice

loadbalance policy PRD_LB-PMAP

loadbalance vip icmp-reply active

class PRD_HTTPS_VIP

loadbalance vip inservice

loadbalance policy PRD_LB-PMAP

loadbalance vip icmp-reply

appl-parameter http advanced-options HTTP_PARAMS

connection advanced-options CONN_PARAMS

interface vlan 70

service-policy input PRD_PMAP

Receiving error when applying new policy-map/class-map

ajayku2 — Wed, 12 Oct 2011 21:26:00 GMT

Jeff make sure the same ip range or IP is not assigned in any of the context.

topic Receiving error when applying new policy-map/class-map in Application Networking

Receiving error when applying new policy-map/class-map

Receiving error when applying new policy-map/class-map