topic Re: WMT Stream Splitting not working in Application Networking https://community.cisco.com/t5/application-networking/wmt-stream-splitting-not-working/m-p/246120#M3548 <HTML><HEAD></HEAD><BODY><P>It is worth a try, the bug report stated that multicast out fails after 20 minutes. I am having a problem to get multicast out to start. </P></BODY></HTML> Wed, 19 May 2004 14:11:25 GMT crwhite 2004-05-19T14:11:25Z WMT Stream Splitting not working https://community.cisco.com/t5/application-networking/wmt-stream-splitting-not-working/m-p/246118#M3546 <P>I am attempting to use a CE565 for unicast in multicast out stream splitting. I have the Unicast In Unicast Out working but can not get the Multicast Out. Basic setup is a Windows Media 7 Server encoding to port 1111 with a broadcast publishing point called station1. I also setup a broadcast alias in the CE called station1 that points to .asx file created when I setup the broadcast point on the Windows Media Server. I have also setup a Multicast Station on the CE called mcstation1 set a multicast address; port; and media source which is the .asx file from the Windows Media server. When I enter the CDN URL for the multicast station on the content engine Windows Media player opens then generates a file not found error. A sniffer trace shows that the CE565 sends an HTTP 404 error. </P><P></P><P>Has anyone out there successfully setup Unicast In - Multicast out using ACNS 5.0.11? If so would you share you configuration?</P> Wed, 12 May 2004 16:58:24 GMT https://community.cisco.com/t5/application-networking/wmt-stream-splitting-not-working/m-p/246118#M3546 crwhite 2004-05-12T16:58:24Z Re: WMT Stream Splitting not working https://community.cisco.com/t5/application-networking/wmt-stream-splitting-not-working/m-p/246119#M3547 <HTML><HEAD></HEAD><BODY><P>Have you seen bug CSCdx64276? Changing the mtu should resolve the issue</P></BODY></HTML> Tue, 18 May 2004 15:01:14 GMT https://community.cisco.com/t5/application-networking/wmt-stream-splitting-not-working/m-p/246119#M3547 owillins 2004-05-18T15:01:14Z Re: WMT Stream Splitting not working https://community.cisco.com/t5/application-networking/wmt-stream-splitting-not-working/m-p/246120#M3548 <HTML><HEAD></HEAD><BODY><P>It is worth a try, the bug report stated that multicast out fails after 20 minutes. I am having a problem to get multicast out to start. </P></BODY></HTML> Wed, 19 May 2004 14:11:25 GMT https://community.cisco.com/t5/application-networking/wmt-stream-splitting-not-working/m-p/246120#M3548 crwhite 2004-05-19T14:11:25Z