topic Re: Client/Server Load Balancing in Application Networking

Client/Server Load Balancing

rcrowe — Mon, 07 Jan 2002 15:59:10 GMT

i am using LD416's for our external web servers and like the performace/functionality. We have a 12mb pipe and they keep up with hits/access fine. i am looking for a load-balancing solution for internal client/server use. clients are connected at 10/100mb and servers are connected at 1000mb. any recommended setups?

Re: Client/Server Load Balancing

ciscomoderator — Mon, 14 Jan 2002 19:02:15 GMT

Since there has been no response to your post, it appears to be either too complex for other forum members to assist you. If you don't get a suitable response to your post, you may wish to review our resources at the online http://www.cisco.com/go/solutions. You may also contact our product information line at 1-800-553-NETS or a Cisco Systems Engineer at your local Cisco office or reseller. To locate your local Cisco representative, visit http://www.cisco.com/warp/public/687/Directory.shtml

If anyone else in the forum has some advice, please reply to this thread.

Thank you for posting.

Re: Client/Server Load Balancing

perherna — Thu, 21 Feb 2002 01:42:57 GMT

Have you looked into the Cisco Content Service Service Switch?

http://www.cisco.com/univercd/cc/td/doc/pcat/11000.htm