topic Logging buffered not working in Application Networking https://community.cisco.com/t5/application-networking/logging-buffered-not-working/m-p/1883472#M36660 <P>Hello:</P><P></P><P>In an ACE&nbsp; module multicontext environment the buffered logging is not working on the last context I created.</P><P> The same config though works well for another context.</P><P></P><P>The maximum size and the buffer size is showing 0 in the "show logging" below:</P><P></P><P>Thanks for helping</P><P></P><P></P><P></P><P>logging enable</P><P>logging standby</P><P>logging timestamp</P><P>logging trap 5</P><P>logging history 4</P><P>logging buffered 5</P><P>logging facility 16</P><P>logging queue 200</P><P>logging device-id context-name</P><P>logging host 10.10.10.1 udp/514 </P><P>logging host 10.10.10.2 udp/514 </P><P>logging rate-limit 42 60 level 0</P><P>logging rate-limit 42 60 level 1</P><P>logging rate-limit 42 60 level 2</P><P>logging rate-limit 42 60 level 3</P><P>logging rate-limit 42 60 level 4</P><P>logging rate-limit 42 60 level 5</P><P>logging rate-limit 42 60 level 6</P><P>logging rate-limit 42 60 level 7</P><P></P><P></P><P>##################################################</P><P>show logging`</P><P></P><P>Syslog logging:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; enabled</P><P>Facility:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 16</P><P>History logging:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; enabled (level- warnings)</P><P>Supervisor logging:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; disabled</P><P>Trap logging:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; enabled (level - notifications)</P><P>Timestamp logging:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; enabled</P><P>Fastpath logging:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; disabled</P><P>Persist logging:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; disabled</P><P>Standby logging:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; enabled</P><P>Rate-limit logging:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; (min - 10000 max 100000 msgs/sec)</P><P>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 42 messages 60 seconds level 0 </P><P>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 42 messages 60 seconds level 1 </P><P>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 42 messages 60 seconds level 2 </P><P>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 42 messages 60 seconds level 3 </P><P>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 42 messages 60 seconds level 4 </P><P>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 42 messages 60 seconds level 5 </P><P>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 42 messages 60 seconds level 6 </P><P>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 42 messages 60 seconds level 7 </P><P>Console logging:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; disabled</P><P>Monitor logging:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; disabled</P><P>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Logging to 10.10.10.1 udp/514&nbsp; </P><P>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Logging to 10.10.10.2 udp/514&nbsp; </P><P>Device ID:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; context name "CTC_PROD7"</P><P>Message logging:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; none</P><P>Buffered logging:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; enabled (level - notifications) <STRONG>maximum size 0---------------------------&gt;&gt;&gt;&gt;&gt;&gt;</STRONG></P><P><STRONG>Buffer info: current size - 0</STRONG> global pool - 4194304 used pool - 4194304</P><P>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; min - 418816 max - 0</P><P>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; cur ptr = 0 wrapped - yes</P> Tue, 08 May 2012 19:03:24 GMT r.shummoogum 2012-05-08T19:03:24Z Logging buffered not working https://community.cisco.com/t5/application-networking/logging-buffered-not-working/m-p/1883472#M36660 <P>Hello:</P><P></P><P>In an ACE&nbsp; module multicontext environment the buffered logging is not working on the last context I created.</P><P> The same config though works well for another context.</P><P></P><P>The maximum size and the buffer size is showing 0 in the "show logging" below:</P><P></P><P>Thanks for helping</P><P></P><P></P><P></P><P>logging enable</P><P>logging standby</P><P>logging timestamp</P><P>logging trap 5</P><P>logging history 4</P><P>logging buffered 5</P><P>logging facility 16</P><P>logging queue 200</P><P>logging device-id context-name</P><P>logging host 10.10.10.1 udp/514 </P><P>logging host 10.10.10.2 udp/514 </P><P>logging rate-limit 42 60 level 0</P><P>logging rate-limit 42 60 level 1</P><P>logging rate-limit 42 60 level 2</P><P>logging rate-limit 42 60 level 3</P><P>logging rate-limit 42 60 level 4</P><P>logging rate-limit 42 60 level 5</P><P>logging rate-limit 42 60 level 6</P><P>logging rate-limit 42 60 level 7</P><P></P><P></P><P>##################################################</P><P>show logging`</P><P></P><P>Syslog logging:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; enabled</P><P>Facility:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 16</P><P>History logging:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; enabled (level- warnings)</P><P>Supervisor logging:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; disabled</P><P>Trap logging:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; enabled (level - notifications)</P><P>Timestamp logging:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; enabled</P><P>Fastpath logging:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; disabled</P><P>Persist logging:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; disabled</P><P>Standby logging:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; enabled</P><P>Rate-limit logging:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; (min - 10000 max 100000 msgs/sec)</P><P>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 42 messages 60 seconds level 0 </P><P>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 42 messages 60 seconds level 1 </P><P>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 42 messages 60 seconds level 2 </P><P>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 42 messages 60 seconds level 3 </P><P>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 42 messages 60 seconds level 4 </P><P>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 42 messages 60 seconds level 5 </P><P>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 42 messages 60 seconds level 6 </P><P>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 42 messages 60 seconds level 7 </P><P>Console logging:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; disabled</P><P>Monitor logging:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; disabled</P><P>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Logging to 10.10.10.1 udp/514&nbsp; </P><P>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Logging to 10.10.10.2 udp/514&nbsp; </P><P>Device ID:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; context name "CTC_PROD7"</P><P>Message logging:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; none</P><P>Buffered logging:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; enabled (level - notifications) <STRONG>maximum size 0---------------------------&gt;&gt;&gt;&gt;&gt;&gt;</STRONG></P><P><STRONG>Buffer info: current size - 0</STRONG> global pool - 4194304 used pool - 4194304</P><P>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; min - 418816 max - 0</P><P>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; cur ptr = 0 wrapped - yes</P> Tue, 08 May 2012 19:03:24 GMT https://community.cisco.com/t5/application-networking/logging-buffered-not-working/m-p/1883472#M36660 r.shummoogum 2012-05-08T19:03:24Z Logging buffered not working https://community.cisco.com/t5/application-networking/logging-buffered-not-working/m-p/1883473#M36661 <HTML><HEAD></HEAD><BODY><P>Hi, </P><P></P><P>This is because your global pool is full. Go to one of your other contexts clear logg , and will work.</P><P></P><P style="background-color: #ffffff; border-collapse: collapse; font-size: 12px; list-style-type: none; font-family: Arial, verdana, sans-serif;"><SPAN style="border-collapse: collapse; list-style-type: none;">Buffer info: current size - 0</SPAN> <STRONG>global pool - 4194304 used pool - 4194304</STRONG></P><P></P><P></P><P>Dan</P></BODY></HTML> Tue, 08 May 2012 20:19:56 GMT https://community.cisco.com/t5/application-networking/logging-buffered-not-working/m-p/1883473#M36661 Dan-Ciprian Cicioiu 2012-05-08T20:19:56Z Logging buffered not working https://community.cisco.com/t5/application-networking/logging-buffered-not-working/m-p/1883474#M36662 <HTML><HEAD></HEAD><BODY><P>Thank you. I will try that.</P></BODY></HTML> Wed, 09 May 2012 13:21:18 GMT https://community.cisco.com/t5/application-networking/logging-buffered-not-working/m-p/1883474#M36662 r.shummoogum 2012-05-09T13:21:18Z