SNMP setup on GSS-4492-k9

12pratham — Wed, 23 May 2012 17:45:58 GMT

configured my GSS to setup traps to snmp server ,but the snmp server is not receiving any traps from GSS

snmp-server enable

snmp-server community-string public ro

snmp-server host 10.19.41.11 public traps version 2 udp-port 162

snmp-server host 10.19.40.19 public traps version 2 udp-port 162

snmp-server enable-traps gslb ans

snmp-server enable-traps gslb dns

snmp-server enable-traps gslb kal

snmp-server enable-traps gslb peer-status

snmp-server enable-traps core

snmp-server enable-traps snmp cold-start

snmp-server enable-traps snmp authentication

snmp-server enable-traps performance cpu-rising-threshold

snmp-server enable-traps performance cpu-falling-threshold

snmp-server trap-source ethernet 0

Let me know if I need to add anything to my config

version on GSS 4.1(1)

cpomeroy — Wed, 23 May 2012 18:04:18 GMT

Looks fine...

Can you send the output of

show snmp

Thanks,

Chris

topic SNMP setup on GSS-4492-k9 in Application Networking