Limiting Policy Map to source-address

flosoftbiz — Tue, 14 May 2013 20:36:26 GMT

Hi all,

I'm desperately trying to get the ACE to limit access to a certain policy based on a list of source address hosts.

So far I've gotten this configuration:

object-group network ALLOWED-IP
  description IPs allowed to access HTTPS
  host 94.247.XXX.XXX
  host 178.132.XXX.XXX
  host 86.26.XXX.XXX
  host 5.135.XXX.XXX
access-list ANY line 8 extended permit icmp any any
access-list ANY line 16 extended permit ip any any
ssl-proxy service proxy-1
class-map match-all L4-WEB-IP
  2 match virtual-address 5.39.XXX.XXX tcp eq www
class-map type management match-all PUBLIC_REMOTE
  2 match protocol ssh source-address 5.135.XXX.XXX 255.255.255.255
class-map type management match-all REMOTE_ACCESS
  2 match protocol ssh any
policy-map type management first-match REMOTE_MGMT_ALLOW_POLICY
  class REMOTE_ACCESS
    permit
policy-map type management first-match REMOTE_PUBLIC_MGMT
  class PUBLIC_REMOTE
    permit
policy-map type loadbalance http first-match WEB_L7_POLICY
  class class-default
    serverfarm FARM_WEB
    insert-http x-forward header-value "%is"
policy-map multi-match WEB-to-vIPs
  class L4-WEB-IP
    loadbalance vip inservice
    loadbalance policy WEB_L7_POLICY
    loadbalance vip icmp-reply active
    nat dynamic 1 vlan 3014
    appl-parameter http advanced-options HTTP_PARAMETER_MAP
interface vlan 1229
  ip address 5.39.XXX.XXX 255.255.255.240
  alias 5.39.XXX.XXX 255.255.255.240
  peer ip address 5.39.XXX.XXX 255.255.255.240
  access-group input ANY
  service-policy input REMOTE_PUBLIC_MGMT
  service-policy input WEB-to-vIPs
  no shutdown

Does anyone have any suggestions?

Limiting Policy Map to source-address

Kanwaljeet Singh — Tue, 21 May 2013 02:40:57 GMT

Hi Florian,

Please try this configuration and see if it meets your requirment.

class-map match-any Source

2 match source-address 94.247.XXX.XXX 255.255.255.255

3 match source-address 178.132.XXX.XXX 255.255.255.255

4 match source-address 86.26.XXX.XXX 255.255.255.255

5 match source-address 5.135.XXX.XXX 255.255.255.255

class-map match-all L4-WEB-IP

2 match virtual-address 5.39.XXX.XXX tcp eq www

policy-map type loadbalance http first-match WEB_L7_POLICY

class Source

serverfarm FARM_WEB

insert-http x-forward header-value "%is"

policy-map multi-match WEB-to-vIPs

class L4-WEB-IP

loadbalance vip inservice

loadbalance policy WEB_L7_POLICY

loadbalance vip icmp-reply active

nat dynamic 1 vlan 3014

appl-parameter http advanced-options HTTP_PARAMETER_MAP

interface vlan 1229

ip address 5.39.XXX.XXX 255.255.255.240

alias 5.39.XXX.XXX 255.255.255.240

peer ip address 5.39.XXX.XXX 255.255.255.240

access-group input ANY

service-policy input REMOTE_PUBLIC_MGMT

service-policy input WEB-to-vIPs

no shutdown

Let me know how it goes.

Regards,

Kanwal

topic Limiting Policy Map to source-address in Application Networking

Limiting Policy Map to source-address

Limiting Policy Map to source-address