Cisco ACE loadbalancing matching more than one header in L7 class map

abhisar patil — Fri, 01 Nov 2013 05:51:20 GMT

Dear All,

This is regarding Cisco ACE loadbalancing matching more than one header in L7 class map. I have a small setup with ACE 30 module in Cisco6500. I have got three webservers. Presently I have following configuration where I am mathing one url header.

class-map type http loadbalance match-all L7_WEB_HEADER_MATCH

description MATCH THE HOST HEADER OF HTTP REQUEST

2 match http header Host header-value ".*abhisar.com*"

So for above configuration, when traffic is coming for abhisar.com, it is working fine.

Now, I have following headers and DNS entry is pointing to same virtual IP for all http url header same as abhisar.com

abhisarindia.com

indiaabhi.com

So new configuration will be

class-map type http loadbalance match-any L7_WEB_HEADER_MATCH

description MATCH THE HOST HEADER OF HTTP REQUEST

2 match http header Host header-value ".*abhisar.com*"

4 match http header Host header-value ".*abhisarindia.com*"

6 match http header Host header-value ".*indiaabhi.com*"

So just want to confirm if this is fine.

Thank You,

Abhisar.

Cisco ACE loadbalancing matching more than one header in L7 clas

rajsures — Fri, 01 Nov 2013 06:46:09 GMT

Hi Abhisar,

The class-map configured looks fine to match as per your criteria.

Thanks,

Rajesh.

Cisco ACE loadbalancing matching more than one header in L7 clas

abhisar patil — Fri, 01 Nov 2013 06:59:21 GMT

Dear Rajesh,

Thank you for reply. I will let you know once I carry out this activity.

Thank You,

Abhisar.

topic Cisco ACE loadbalancing matching more than one header in L7 clas in Application Networking

Cisco ACE loadbalancing matching more than one header in L7 class map

Cisco ACE loadbalancing matching more than one header in L7 clas

Cisco ACE loadbalancing matching more than one header in L7 clas