topic ISR 4300 WAAS in Application Networking

ISR 4300 WAAS

Kamran Mustafayev — Fri, 30 Sep 2016 06:38:02 GMT

Hi,

Is it possible to create WAAS network using two ISR 4300 series, i mean as i understand ISR cant be CM in WAAS, can use WAN optimization without WCM ?

Re: ISR 4300 WAAS

QW_netzwerk — Thu, 13 Sep 2018 14:06:19 GMT

Hello Kamran,

I have this issue too. If I understand properly from Cisco doc that there must be wcm installed and it can be installed on vmware hypervisor too. But it is not still clear to me whether that wcm can be installed on any vmware hypervisor or it requires ucs server where vmware hypervisor will run.

Regards

Saimun

Re: ISR 4300 WAAS

finn.poulsen — Fri, 14 Sep 2018 13:09:52 GMT

Hi Saimun, Please refer to this documentation : https://www.cisco.com/c/en/us/td/docs/app_ntwk_services/waas/vwaas/vwaas-641/vwaas-install-config/v-intro.html#76353 And refer to table 1-16 and/or 1-17 for supported hypervisors. Best Regards Finn