Cisco WAE# WAE-512-K9 having the hang issue

ashutosh-tiwari — Wed, 28 Jun 2017 05:15:37 GMT

Issue description: Facing the same issue as WAAS is getting hang after which it also hangs the traffic between the other two locations. For your information we have bypass the WAAS device then there is no hang issue between the locations. Also in the central manager the respective location is not shown there but other two locations are there. Cisco Device Model : WAE-512-K9=

Ashutosh,

jbejaranos976 — Wed, 28 Jun 2017 15:00:11 GMT

Ashutosh,

I noticed you got a core dump created, so you could open a TAC ticket to analyze it, possibly you hit a bug and may need to upgrade as well. They will ask you for the outputs you already uploaded to this thread.

You may try to do:

disk delete-data-partitions

Only caveat is when you do it you will loose all the disk data. Additionally, it will take some time for rebuilding to finish so better today after-hours

Finally, there could be some possibility of a disk failure hence you might need to replace it.

Hope this helps!

Jorge

PS: Don´t forget to rate it so other people can use it as reference in the future

topic Cisco WAE# WAE-512-K9 having the hang issue in Application Networking

Cisco WAE# WAE-512-K9 having the hang issue

Ashutosh,