WCCP Redirection without Access-List

Nilesh Agnihotri — Wed, 29 Jul 2015 21:08:46 GMT

I have a doubt on Access-list for WCCP redirection.

I have enabled WCCP and applied the redirect in statements on the interfaces without defining any access-list to intercept the traffic.

Here is the config :

ip wccp 61
ip wccp 62

interface GigabitEthernet0/1
description GM056980 Offnet() FRO2005696774VRP(2005696694)
bandwidth 20000
ip address 10.3.137.134 255.255.255.252
no ip proxy-arp
ip wccp 61 redirect in
duplex full
speed 100
no cdp enable
no mop enabled
service-policy output QOS-SHAPER-GI0/1

interface Vlan1
description GM056980 Customer LAN - L3
ip address 208.49.97.153 255.255.255.248 secondary
ip address 10.60.1.1 255.255.252.0
ip helper-address 10.60.1.10
ip helper-address 10.1.1.52
ip helper-address 10.3.1.28
no ip proxy-arp
ip wccp 62 redirect in
ip flow ingress
ip flow egress
vlan-id dot1q 1
exit-vlan-config
!

Now the question is : what will happen if i haven't define any access-list. Will Router redirect all the Traffic to Cache device or will it not deny entire traffic to redirect it to the cache device.

I know it could be very silly doubt , but this information can be helpful for me in troubleshooting the issue which i am facing.

Hi Nilesh, Without a redirect

finn.poulsen — Tue, 04 Aug 2015 14:39:33 GMT

Hi Nilesh,

Without a redirect ACL, the router will redirect all incoming (TCP only!!) traffic to the WAAS device.

Best regards

Finn

topic Hi Nilesh, Without a redirect in Application Networking

WCCP Redirection without Access-List

Hi Nilesh, Without a redirect