topic WAE 674 multipurpose in Application Networking https://community.cisco.com/t5/application-networking/wae-674-multipurpose/m-p/2454600#M44153 <HTML><HEAD></HEAD><BODY><P>Hi ,</P><P></P><P>Yes you can use the 674 as either WAAS device or content engine. To do this you need to use the CD recovery procedure in formating the flash,disk and installing the WAAS IOS image.</P><P></P><P>If you have WAAS recovery CD <SPAN style="font-size: 10pt;">then run these steps:</SPAN></P><P> <SPAN style="font-size: 10pt;"> </SPAN></P><P>2,3,5,7,8, remove the CD from the CD Drive and 9</P><P></P><P></P><P>Regards,</P><P>Bala</P></BODY></HTML> Fri, 07 Mar 2014 10:13:06 GMT Balakrishnan Rajvel 2014-03-07T10:13:06Z WAE 674 multipurpose https://community.cisco.com/t5/application-networking/wae-674-multipurpose/m-p/2454599#M44152 <P>HI there,</P><P>I have configured Cisco WAE 674 as Content Engine conntected with Websense Server for filtering.Can I use the same device also as WAAS and configure WCCP ?</P><P>thanks a lot!</P> Tue, 04 Mar 2014 13:27:34 GMT https://community.cisco.com/t5/application-networking/wae-674-multipurpose/m-p/2454599#M44152 bestasw01 2014-03-04T13:27:34Z WAE 674 multipurpose https://community.cisco.com/t5/application-networking/wae-674-multipurpose/m-p/2454600#M44153 <HTML><HEAD></HEAD><BODY><P>Hi ,</P><P></P><P>Yes you can use the 674 as either WAAS device or content engine. To do this you need to use the CD recovery procedure in formating the flash,disk and installing the WAAS IOS image.</P><P></P><P>If you have WAAS recovery CD <SPAN style="font-size: 10pt;">then run these steps:</SPAN></P><P> <SPAN style="font-size: 10pt;"> </SPAN></P><P>2,3,5,7,8, remove the CD from the CD Drive and 9</P><P></P><P></P><P>Regards,</P><P>Bala</P></BODY></HTML> Fri, 07 Mar 2014 10:13:06 GMT https://community.cisco.com/t5/application-networking/wae-674-multipurpose/m-p/2454600#M44153 Balakrishnan Rajvel 2014-03-07T10:13:06Z